Three-phase meter direct connection. 65A - Direct kilowatt-hour meter 5A B23 212-100

Three-phase meter direct connection. 65A - Direct kilowatt-hour meter 5A B23 212-100 – ABB – 2CMA100166R1000 – 7392696001663: Three-phase meter direct connection. 65A B23 212-100 Electronic counter type, rated current (In) 5A, maximum current (Imax) 65A, rated voltage (Un) NL 176... 276V, rated voltage (Un) LL 400... 400V, frequency 47.5... 63Hz , Accuracy class B, Polart three-wire/four-wire, Direct measurement version, Active and reactive power energy type, Suitable for purchase/delivery, One-tariff tariff version, Load profile measurement type, Backstop, Calibrated, Measuring Instruments Directive approval, Electrical pulse output, S0 pulse type, Pulse rate 1... 9999Imp/kWh (kvarh), digital display type, REG mounting type, width in pitch units 4, design of the RS-485 interface, number of digits 7, degree of protection (IP) IP20, three-phase meter for measuring a three-wire or four-wire three-phase network via a direct connection up to maximum 65 A. The following values are output on a white backlit display with up to 7 digits: active energy (class 1) and reactive energy (class 2) for import and export, power, currents, voltages (LL, LN), frequency, cos phi, power factor and apparent power, both per phase and overall. Communication can take place via the integrated RS485 interface (Modbus RTU) or via the infrared interface for connecting a KNX module. The energy meter has an output. This can be used either as a pulse output to output active or reactive energy or as an alarm output. Up to 25 alarm values (threshold values with a time delay) can be set here. The meter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.