Transformer kilowatt-hour meter 1A B24 352-100

Transformer kilowatt-hour meter 1A B24 352-100 – ABB – 2CMA100183R1000 – 7392696001830: Instrument transformer meter RS485 B24 352-100 Electronic meter type, rated current (In) 1A, maximum current (Imax) 6A, rated voltage (Un) NL 230 ... 240V, rated voltage (Un) LL 380 ... 415V, frequency 50 ... 60Hz, Accuracy class C, Polart four-wire, measuring transducer design, energy type active and reactive power, suitable for import/delivery, multi-tariff tariff design, external tariff control, backstop, calibrated, Measuring Instruments Directive approval, electrical pulse output, pulse type S0, pulse rate 1 ... 999999imp/kWh (kvarh), display type digital, mounting type REG, width in pitch units 4, design of the Modbus interface, number of digits 7, degree of protection (IP) IP20, degree of protection (NEMA) other, three-phase meter for measuring a three-wire or four-wire three-phase network via a converter -Connection CT (transformer ratio for current configurable) up to a maximum of 6 A. The following values are output via a seven-segment display with up to 7 digits: active energy (class 0.5) and reactive energy ( Class 2) for import and export, power, current, voltage (LL, LN), frequency, cos phi, power factor and apparent power, both per phase and overall. Communication can take place via the integrated RS485 interface (Modbus RTU) or via the infrared interface for connecting a KNX module. The energy meter has 2 permanently configured inputs and outputs. The output can be used either as a pulse output to output active or reactive energy or as an alarm output. Up to 25 alarm values (threshold values with a time delay) can be set here. The inputs are used to control the tariffs or to count external pulses. The resettable intermediate counter enables individual intervals to be measured. In addition, the meter records up to 4 tariffs. The meter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.