Flow switch 8 bar - Built-in flow switch, liquid JSF-1 E

Flow switch 8 bar - Built-in flow switch, liquid JSF-1 E – Alre-it – JA060100 – 4050528047083: Flow monitor 8 bar JSF-1 E Suitable for liquids, measuring head integrated in the device, measuring head included, other measuring principle, version of the process connection threaded connection, number of switching points 1, medium temperature -40... 120°C, ambient temperature for the evaluation electronics -40... 85°C, pressure resistance measuring head 8bar, rated control supply voltage Us at AC 50 Hz 24... 230V, type of voltage for actuation AC, number of contacts as NC contact 0, number of contacts as NO contact 0, number of contacts as changeover contact 1, design of the electrical connection Screw connection, width 165mm, height 128mm, depth 71mm, degree of protection (IP), evaluation electronics IP65, degree of protection (IP), measuring head IP65, This flow monitor was specially developed to monitor the flow of liquid media. The monitor is typically used in mechanical and apparatus engineering, for monitoring oil cooling and lubrication circuits or as a water shortage protection in sprinkler systems, in heating systems, chillers and heat pumps. It is installed vertically in a horizontal pipeline. At least 5 times the pipe diameter is to be provided as a calming section in front of and behind the paddle. The maximum flow can be significantly higher than the maximum setting of the monitor. Not tested for drinking water.