Digital multimeter - Digital multi meter MM1

MM1 044027 4014651000513 EAN/GTIN DE 83723692 WEEE

Our best price
£82.45 incl. VAT (£0.00)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Digital Multimeter MM1 Display digital, analog bar display analog/logarithmic, manual/automatic... more
Digital multimeter - Digital multi meter MM1 – Benning – 044027 – 4014651000513: Digital Multimeter MM1 Display digital, analog bar display analog/logarithmic, manual/automatic measuring range selection, max. voltage measuring range AC 600V, smallest resolution AC voltage 1 mV, max. voltage measuring range DC 600V, smallest resolution DC voltage 0.1 mV, max. current measuring range DC 0.0032A , Smallest resolution direct current 0.1 µA, Max. resistance measuring range 32MOhm, Smallest resolution resistance 0.1 Ohm, continuity test/diode test, continuity test, instantaneous value memory (data hold), measuring circuit category CAT III, max. voltage measuring circuit category 600V, basic measurement types for current, voltage, Resistance, continuity, diode, safe current measurement up to 300 A via plug-in current clamp adapter, automatic and/or manual measuring range selection, overload protection in all areas, automatic device switch-off when not in use, robust housing design thanks to integrated rubber protective frame, compact protective bag included in the scope of delivery
... more
Display digital
Analog bar graph yes
Analog bar graph analog / logarithmic no
Multiview no
With background screen illumination no
Range selection manual / automatic
Max. Voltage measuring range AC 600V
Smallest resolution AC voltage 1 mV
Max. Voltage measuring range DC 600V
Smallest resolution DC voltage 0.1 mV
Max. Current measuring range AC 0A
Smallest resolution AC other
Max. Current measuring range DC 0.0032A
Lowest resolution DC 0.1 μA
Max. Resistance measuring range 32 MOhm
Smallest resolution resistance 0.1 ohms
Temperature measurement RTD no
Temperature measurement no
Temperature measurement TC no
Max. Temperature measuring range 0 °C
Lowest resolution temperature other
Capacitance measurement no
Max. Capacity measuring range 0 μF
Smallest resolution capacity other
Frequency measurement no
Max. Frequency measuring range 0 kHz
Smallest resolution frequency other
Continuity test / diode test yes
Insulation resistance measurement range 0 mOhm
Rated test voltage 10 V no
Rated test voltage 50 V no
Rated test voltage 100 V no
Rated test voltage 250 V no
Rated test voltage 500 V no
Rated test voltage 1000 V no
Cable length measurement no
Power and energy measurement no
Harmonic Analysis / Power Quality no
With level measurement (dB) no
Relative value measurement no
Inductance no
Conductivity measurement no
Continuity test yes
Current value memory (Data Hold) yes
Maximum value storage no
Minimum value memory no
Peak memory no
True RMS Measurement (TRMS) no
Duty Ratio no
Speed ​​measurement no
Measurement memory no
Interface no
Bluetooth interface no
IR interface no
Breaker no
Measurement category CAT III
Max. Voltage measuring circuit category 600V
Explosion-tested version no
IP protection) IP30

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Digital multimeter - Digital multi meter MM1"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.