Graphic Fixed installation safety tester BENNING IT 105

Graphic Fixed installation safety tester BENNING IT 105 – Benning – 044105 – 4014651441057: Installation tester with graphic display BENNING IT 105 Graphic display, insulation resistance measurement, resistances of insulating floors and walls, low-ohm measurement, loop resistance/impedance measurement, loop measurement without RCD/FI tripping, internal network resistance measurement, determination of short-circuit current/overcurrent protective devices, RCD/FI test, waveform for RCD/FI testing for residual current circuit breakers type A, F, RCD/FI testing with increasing residual current, RCD/FI analysis function, rotating field test, Benning IT 105. Multifunctional installation tester. Multifunctional installation tester for testing electrical systems in accordance with DIN VDE 0100-600, IEC 60364-6 and DIN VDE 0105-100, EN 50110. Graphic display. Backlit graphic display. Measurements: Insulation resistance measurement yes. Insulation resistance 0.20 MOhm - 199 MOhm. Rated test voltage 250 V. Rated test voltage 500 V. Rated test voltage 1000 V. Resistances of insulating floors and walls yes. Yes, low-impedance measurement. Low-ohm resistance 0.15 ohms - 199 ohms, test current 200 mA and continuity. Loop resistance/impedance measurement yes. Loop measurement without RCD/FI tripping yes. Line impedance 0.20 Ohm - 1999 Ohm LN/ L, with calculation of the short-circuit current. Loop impedance 0.20 Ohm - 1999 Ohm L-PE, without RCD/FI tripping and short-circuit current. Internal network resistance measurement yes. Determination of short-circuit current/overcurrent protection devices yes. RCD/FI test yes. Curve shape for RCD/FI test for type A, F, AC residual current circuit breakers. Test current sinusoidal (AC) and pulsating direct current (A), standard and delayed (S). RCD/FI test with increasing fault current yes. RCD/FI analysis function yes. Testing of RCDs standard and delayed S, type AC, A, F with AUTO test, trip time and trip current with ramp test. rotary field test yes. Voltage measuring range AC/DC 1 V - 440 V. Frequency measuring range 45 Hz - 65 Hz. Special features: Extra large graphic display 95 x 55 mm with background lighting. Test tip with TEST button to start the measurement process. AUTO start function for low-impedance loop and line impedance measurement. LOCK function Continuous measurement of the insulation resistance, zero adjustment of the measuring lines up to 10 ohms for RPE measurement. Including robust hard case, test probe with TEST button, test probe/crocodile clip set, test line with safety plug, shoulder strap, 6 x 1.5 V mignon batteries, calibration certificate, fuse 1.6 A (10194027)