Axolute Nighter tactile sensor HS4657M3

Axolute Nighter tactile sensor HS4657M3 – bticino – 8012199942339: The Nighter and Whice control is a control where the traditional pushbuttons are replaced by capacitive sensors.The device can be used to perform the functions typical of a special SCS control by simply moving a finger close to the surface. It is produced in the 3 and 4 module flush mounted version, 6 and 8 keys respectively. Each zone corresponding to a key is marked at the centre by a light blue LED. When the user moves a finger close to the zone, its intensity increases sensibly, and remains so until the finger is moved away again. The brightness level of the LEDs can be changed using the appropriate adjustment pushbutton. The Nighter and Whice control can operate in 4 different ways: self-learning, scenarios, swivelling, CEN. - The self-learning mode (cyclic or non-cyclic) allows to associate to each key most of the typical automation system, sound system, video door entry system (staircase light, open-door, call to the floor, door lock, and cycling of cameras) functions, in addition to auxiliary controls. - The scenario mode can be used to recall, program and delete 6 scenarios of a scenario module. - The swivelling mode can be used to drive the 3 or 4 consecutive light points or rolling shutters (or rooms or groups). - The CEN mode enables using the control with the scenario programmer item MH 200. In order to clean the device, it is possible to temporarily disable the sensitive zones by pressing two diagonally opposite zones at the same time. The LEDs will flash in sequence. Normal operation is automatically reinstated after 10 seconds.Technical dataPower supply from SCS BUS: 27 Vdc Operating power supply with SCS BUS: 18 – 27 Vdc Max absorption HD/HC/HS4657M3: 20 mA Max absorption HD/HC/HS4657M4: 25 mA Operating temperature: 0–40 °C