SCS THERMOSTAT M. DISPLAY ANTHR H4691

SCS THERMOSTAT M. DISPLAY ANTHR H4691 – bticino – 8005543498040: Thermostat with display for the control of the room temperature in temperature control systems.This device can be used both if a temperature control central unit is present or not present, when appropriately configured it can be used as:- MyHOME temperature control system probe- Hotel room thermostat- Residential system thermostat.It has 4 keys that can be used to select the desired temperature and the various operating modes, when used with fan-coils it can manage the fan speed.The thermostat can manage different operating modes: both automatic and manual, in addition to the Eco, Comfort, Antifreeze/Thermal protection, and OFF.It can also be used in mixed heating/cooling systems, if the two functions are available at the same time on the same system. A contact is also available on the back of the device, to change the operating mode of the thermostat (e.g. window contact, summer/winter switching, etc.). Technical dataPower supply from SCS BUS: 18 – 27 VdcAbsorption: 14 mA with display off, 16 mA with low brightness display, 30 mA with high brightness displayOperating temperature: 0 – 40 °CSize: 2 module flush mountedRecommended installation height: 150 cm from the groundControllable loads: On/Off, Open/Close, 3-point or 0-10V valves. 2-tube and 4-tube fan-coils with On/Off, 3-point, or 0-10V valves. Gateway Climaveneta. Fil Pilote.Correlated devicesThe thermostat must be used with the following actuator devices:- F430/2: ON/OFF relay actuator- F430/4: ON/OFF 4-relay actuator- F430R8: ON/OFF 8-relay actuator- F430R3V10: ON/OFF 3-relay actuator with 2 x 0-10V outputs- F430V10: actuator with 2 x 0-10V outputs- F430FP: actuator for Fil Pilote devices