Shrink divider cap for 3x6-35qmm - Spreader cap 6...35mm² SEH3 35-15

SEH3 35-15 125365 4010311020815 EAN/GTIN

Our best price
£96.04 incl. VAT (£0.00)
£184.09 (-47.83% RRP***)
(For 10 Piece) plus shipping

14-16 days* (GBR)

x 10 Piece
Add to wish list
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Shrink divider cap for 3x6-35qmm SEH3 35-15 type heat shrink, design for 3-wire cables and wires,... more
Shrink divider cap for 3x6-35qmm - Spreader cap 6...35mm² SEH3 35-15 – Cellpack – 125365 – 4010311020815: Shrink divider cap for 3x6-35qmm SEH3 35-15 type heat shrink, design for 3-wire cables and wires, nominal cross-section 6 ... 35mm², shaft diameter before shrinking 35mm, shaft diameter after shrinking 15mm, total length after shrinking 100mm, inner diameter finger before Shrinkage 13mm, inside diameter of finger after shrinking 4mm, operating temperature -40 ... 100°C, sealing dividing cap for plastic, rubber and paper-insulated cables. Areas of application: indoors, outdoors. Properties: Stabilized against UV rays, free from paint-wetting-impairing substances, halogen-free, absolutely moisture-tight, pressure-tight, very good electrical properties, very good mechanical properties. Included in delivery: heat shrinkable divider cap.
... more
Type Heat shrink
Execution for 3-core cables and wires
Nominal cross section 6..35 mm²
Diameter shank before shrinkage 35 mm
Diameter shaft after shrinkage 15 mm
Total length after shrinkage 100 mm
Inner diameter finger before shrinkage 13 mm
Inner diameter fingers after shrinkage 4 mm
Operating temperatur -40..100 °C

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Shrink divider cap for 3x6-35qmm - Spreader cap 6...35mm² SEH3 35-15"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.