Graphic Fixed installation safety tester C.A 6117

Chauvin - C.A 6117 - Graphic Fixed installation safety tester C.A 6117
Photo source: fig. possibly similar
Photo source: fig. possibly similar
C.A 6117 P01145460 3760171418512 EAN/GTIN DE 89933616 WEEE

£1,826.72 incl. VAT (£0.00)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Display graphic, Limit indicator yes, Insulation resistance measurement yes,... more
Graphic Fixed installation safety tester C.A 6117 – Chauvin – P01145460 – 3760171418512: Display graphic, Limit indicator yes, Insulation resistance measurement yes, Überspannungsableiterprüfung no, Low- yes, Low resistance measurement with ramp function no, Earth measurement yes, Selective grounding measurement yes, Earth Ground yes, Specific grounding measurement no, Loop resistance / impedance measurement yes, Loop measurement without RCD / FI tripping yes, Mains internal resistance measurement yes, RCD / FI test yes, RCD / FI test with increasing fault current yes, RCD / FI analysis function yes, PRCD type S, type K test no, Checking IMDs and RCMs no, Measuring leakage currents with adapter yes, Phase sequence test yes, Structured measured value memory yes, Measurement memory yes, Interface yes, Printer port no, Integrated printer no, Remote control of the tester yes
... more
Display graphic
Limit indicator yes
Insulation resistance measurement yes
Überspannungsableiterprüfung no
Low- yes
Low resistance measurement with ramp function no
Earth measurement yes
Selective grounding measurement yes
Earth Ground yes
Specific grounding measurement no
Loop resistance / impedance measurement yes
Loop measurement without RCD / FI tripping yes
Mains internal resistance measurement yes
RCD / FI test yes
RCD / FI test with increasing fault current yes
RCD / FI analysis function yes
PRCD type S, type K test no
Checking IMDs and RCMs no
Measuring leakage currents with adapter yes
Phase sequence test yes
Structured measured value memory yes
Measurement memory yes
Interface yes
Printer port no
Integrated printer no
Remote control of the tester yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Graphic Fixed installation safety tester C.A 6117"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.