Compact combination arrester for 2 single wires - Combined arrester for signal systems BCO CL2 BE 48

Dehn - BCO CL2 BE 48 - Compact combination arrester for 2 single wires - Combined arrester for signal systems BCO CL2 BE 48
Photo source: fig. possibly similar
Photo source: fig. possibly similar
BCO CL2 BE 48 927925 4013364411975 EAN/GTIN DE 11890845 WEEE

Our best price
£48.62 incl. VAT (£0.00)
£92.08 (-47.2% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Combined arrester for signal systems, Combined arrester for signal systems Nominal voltage DC 48... more
Compact combination arrester for 2 single wires - Combined arrester for signal systems BCO CL2 BE 48 – Dehn – 927925 – 4013364411975: Combined arrester for signal systems, Combined arrester for signal systems Nominal voltage DC 48 ... 48V, Max. continuous voltage AC 38,1V, Max. continuous voltage DC 54V, Lightning impulse current (10/350 µs) 3kA, Nominal discharge surge current (8/20) 10kA, Nominal load current 0,75A, Voltage protection level core/core 140V, Voltage protection level core/earth 90V, Limiting frequency 5MHz, Mounting method DIN rail (top hat rail) 35 mm, Connection 1 Clamp, Pro-active thermo-control
... more
Rated voltage DC 48V
Highest continuous voltage AC 38.1 V
Highest continuous voltage DC 54 V
Lightning impulse current (10/350 µs) 3 kA
Nominal discharge current (8/20) 10 kA
Nominal load current 0.75 A
Protection level wire / core 140V
Protection level core / earth 90 V
Cut-off frequency 5 MHz
Mounting DIN rail TH35
Connection 1 Push-in terminal
SPD yes
With telecommunication contact no
Explosion-tested version no
Separation option for signal circuit no
Number of conductors (without earth) 2
Earthing via DIN rail
Overall width 6 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Compact combination arrester for 2 single wires - Combined arrester for signal systems BCO CL2 BE 48"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.