Surge arrester DEHNrail - Surge protection device 24V 2-pole DR M 2P 30 FM

DR M 2P 30 FM 953206 4013364109711 EAN/GTIN DE 11890845 WEEE

Our best price
£65.46 incl. VAT (£0.00)
£123.97 (-47.2% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
ÜS arrester DEHNrail DR M 2P 30 FM Mounting type DIN rail TH35, rated voltage AC 24V, maximum... more
Surge arrester DEHNrail - Surge protection device 24V 2-pole DR M 2P 30 FM – Dehn – 953206 – 4013364109711: ÜS arrester DEHNrail DR M 2P 30 FM Mounting type DIN rail TH35, rated voltage AC 24V, maximum continuous voltage AC 30V, maximum continuous voltage DC 30V, rated load current 25A, rated discharge current (8/20) (LN) 1kA, total discharge current (8/20) (L+ N-PE) 2kA, protection level LN 0.18kV, protection level L-PE/N-PE 0.63kV, number of poles 2, with remote signaling contact, optical signaling on the device, max. conductor cross-section rigid (solid/stranded) 4mm², max flexible (finely stranded) 2.5mm², test class type 3, degree of protection (IP) IP20, two-pole surge arrester DEHNrail modular, type 3 according to EN 61643-11, consisting of base element and plugged-in protection module. High discharge capacity thanks to powerful zinc oxide varistor/spark gap combination. To protect the mains supply of industrial electronics devices from transient overvoltages in control cabinets. For use in the lightning protection zone concept at the interfaces 1 - 2 and higher.
... more
Rated voltage AC 24V
Highest continuous voltage AC 30 V
Highest continuous voltage DC 30 V
Nominal load current 25 A
Nominal discharge current (8/20) (LN) 1 kA
Total discharge current (8/20) (L + N-PE) 2 kA
Protection level LN 0.18 kV
Protection level L-PE / N-PE 0.63 kV
Number of poles 2
Mounting DIN rail TH35
With telecommunication contact yes
Signaling on the device optical
Test class type 3 yes
With noise filter no
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge arrester DEHNrail - Surge protection device 24V 2-pole DR M 2P 30 FM"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.