ÜS arrester DEHNguard - Surge protection for power supply DG S 600 FM

Dehn - DG S 600 FM - ÜS arrester DEHNguard - Surge protection for power supply DG S 600 FM
Photo source: fig. possibly similar
Photo source: fig. possibly similar
DG S 600 FM 952096 4013364109926 EAN/GTIN DE 11890845 WEEE

Our best price
£58.55 incl. VAT (£0.00)
£110.88 (-47.2% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
ÜS arrester DEHNguard DG S 600 FM TN system type, TN-C system type, TN-CS system type, TN-S... more
ÜS arrester DEHNguard - Surge protection for power supply DG S 600 FM – Dehn – 952096 – 4013364109926: ÜS arrester DEHNguard DG S 600 FM TN system type, TN-C system type, TN-CS system type, TN-S system type, TT system type, number of conductors (without earth) 1, rated discharge current (8/20) 15kA, rated voltage AC 480V, Short-circuit strength (Isccr) 25kA, maximum continuous voltage AC 600V, maximum discharge surge current (8/20) 30kA, maximum continuous voltage DC 600V, type of mounting top-hat rail TH35, size 1 TE, protection level 2.5kV, maximum conductor cross-section solid (single/stranded) 35mm² , Max. conductor cross-section flexible (finely stranded) 25mm², with remote signaling contact, optical signaling on the device, test class type 2, degree of protection (IP) IP20, single-pole surge arrester DEHNguard S, type 2 according to EN 61643-11, consisting of base part and plugged-in protection module. High level of device safety thanks to arrester monitoring with thermal dynamic control. To protect low-voltage consumer systems against overvoltages. For use in the lightning protection zone concept at the interfaces 0B - 1 and higher.
... more
Network form DC no
Network form IT no
Network shape TN yes
Mains form TN-C yes
Mains form TN-CS yes
Mains form TN-S yes
Network shape TT yes
Network form other no
Number of conductors (without earth) 1
Nominal discharge current (8/20) 15 kA
Max. Surge current (8/20) 30 kA
Rated voltage AC 480V
Highest continuous voltage AC 600V
Highest continuous voltage DC 600V
Protection level 2.5 kV
Short-circuit resistance (Isccr) 25 kA
Integrated short-circuit protection no
Integrated backup fuse no
Free from leakage current no
Mounting DIN rail TH35
Size 1 TE
With telecommunication contact yes
Signaling on the device optical
Test class type 2 yes
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "ÜS arrester DEHNguard - Surge protection for power supply DG S 600 FM"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.