Surge arrester with 2 RJ45 sockets - Surge protection for signal systems DPA M CLD RJ45B 48

DPA M CLD RJ45B 48 929126 4013364242258 EAN/GTIN DE 11890845 WEEE

Our best price
£40.74 incl. VAT (£0.00)
£77.16 (-47.2% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Surge arrester with 2 RJ45 sockets DPA M CLD RJ45B 48 Rated voltage DC 48 ... 48V, maximum... more
Surge arrester with 2 RJ45 sockets - Surge protection for signal systems DPA M CLD RJ45B 48 – Dehn – 929126 – 4013364242258: Surge arrester with 2 RJ45 sockets DPA M CLD RJ45B 48 Rated voltage DC 48 ... 48V, maximum continuous voltage AC 34V, maximum continuous voltage DC 57V, rated discharge current (8/20) 10kA, lightning impulse current (10/350 µs) 0.5kA, rated load current 1A , protection level wire/wire 600V, protection level wire/earth 500V, limit frequency 100MHz, mounting type DIN rail TH35, connection 1 RJ45, universal arrester for Industrial Ethernet, Power over Ethernet (IEEE 802.3 compliant up to PoE++ / 4PPoE) and similar applications in structured cabling according to class D up to 100MHz. All wire pairs are protected by powerful gas discharge arresters. Adapter version with sockets for DIN rail mounting.
... more
Rated voltage DC 48V
Highest continuous voltage AC 34 V
Highest continuous voltage DC 57 V
Nominal discharge current (8/20) 10 kA
Lightning impulse current (10/350 µs) 0.5 kA
Nominal load current 1 A
Protection level wire / core 600V
Protection level core / earth 500V
Cut-off frequency 100 MHz
Mounting DIN rail TH35
Connection 1 RJ45
SPD no
With telecommunication contact no
Explosion-tested version no
Separation option for signal circuit no
Number of conductors (without earth) 8th
Earthing via DIN rail
Overall width 19 mm
IP protection) IP10

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge arrester with 2 RJ45 sockets - Surge protection for signal systems DPA M CLD RJ45B 48"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.