Thin bed set 900W 6.0 sqm - Floor warming 150W/m² 6m² 140F1658

Thin bed set 900W 6.0 sqm - Floor warming 150W/m² 6m² 140F1658 – Devi – 5703466240090: Thin bed set 900W 6.0qm 140F1658 Application for floor temperature control, connection voltage 230V, connected load 900... 900W, output 150W/m², heat conductor load 11W/m, with carrier mat, fixation of the heat conductor glued on, number of PTC thermistors 1, length of PTC thermistors 4000mm, suitable for damp rooms , area 6m², length 12000mm, width 500mm, thickness 3.5mm, with controller, with room thermostat, with floor temperature sensor, self-adhesive, thin-bed set with WLAN thermostat, flexible sensor protection tube DN10, sensor sleeve made of brass, plastic nails, assembly instructions. The self-adhesive thin-bed heating mat with a connecting cable is ready for installation and was specially developed for installation in leveling compound or flexible adhesive directly below the floor covering. Due to the low installation height of only 3.5 mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This underfloor temperature control system is particularly suitable for retrofitting in angled and/or large rooms, since the second connection can be fed back omitted. The heating cable with additional protective braiding for use with the FI protective circuit is attached to a plastic mesh. The length of the connecting cables is 4.0 m. PTC thermistor: 1 x 4 m, 1.0 mm², voltage: 230 V, nominal limit temperature: 120°C, specific heating output: 150 W/m², linear load: 11W, insulation: PVDF / FEP, resistance tolerance : +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 6 x dA, calculation width 50 cm, delivery width: 48 cm, mat height: 3.5 mm, protection class: IPX7, approval: EN 60335-2-96 , area 6.0 m², 0.5 x 12.0 m