Thin-bed heating mat set 0.5 x 14.0 + Opti - Thin-bed heating 150W/m² 7m² 140F1709

Thin-bed heating mat set 0.5 x 14.0 + Opti - Thin-bed heating 150W/m² 7m² 140F1709 – Devi – 5703466243275: Thin-bed heating mat set 0.5 x 14.0 + Opti 140F1709 Application of thin-bed heating, connection voltage 230V, connected load 1050 ... 1050W, output 150W/m², heat conductor load 11W/m, with carrier mat, fixation of the heat conductor glued on, number of PTC thermistors 1, length the PTC thermistor 4000mm, suitable for damp rooms, area 7m², length 14000mm, width 500mm, thickness 4mm, with controller, with room thermostat, self-adhesive, thin-bed set with Opti clock thermostat, flexible sensor protection tube DN10, plastic nails, assembly instructions. The self-adhesive thin-bed heating mat with a connecting cable is ready for installation and was specially developed for installation in leveling compound or flexible adhesive directly below the floor covering. Due to the low installation height of only 4 mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This underfloor temperature control system is particularly suitable for retrofitting in angled and/or large rooms, since the second connection does not have to be fed back. The heating cable with additional protective braiding for use with the FI protective circuit is attached to a plastic mesh. The length of the connection lines is 2.3 m. PTC thermistor: 1 x 2.3 m, 2 x 1.0 mm², voltage: 230 V, nominal limit temperature: 90°C, specific heating output: 150 W/m², linear load: 11 W, insulation: PVC lead-free / FEP, resistance tolerance: +10% / -5%, minimum laying temperature: 5°C, smallest bending radius: 6 x dA, calculation width 50 cm, delivery width: 48 cm, mat height: 4 mm, protection class: IPX7, approval: IEC 60335-2- 96, area 1.0 m², 0.5 x 14.0 m