Contactor 3 NO contacts, 1 NC contact - Installation contactor 230VAC 3 NO/ 1 NC HS 20-31 230V/50HZ

HS 20-31 230V/50HZ 09980424 4014712067301 EAN/GTIN DE 85624250 WEEE

Our best price
£16.08 incl. VAT (£0.00)
£37.80 (-57.46% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Contactor 3 NO contacts, 1 NC contact HS 20-31 230V/50HZ Rated operating voltage 400 ... 400V,... more
Contactor 3 NO contacts, 1 NC contact - Installation contactor 230VAC 3 NO/ 1 NC HS 20-31 230V/50HZ – Doepke – 09980424 – 4014712067301: Contactor 3 NO contacts, 1 NC contact HS 20-31 230V/50HZ Rated operating voltage 400 ... 400V, Rated operating current 24A, Utilization category 1, Rated operating voltage 230 ... 230V, Type of voltage of the operating voltage AC, Type of voltage of the operating voltage AC, Number of contacts as NO contact 3, Number of Contacts as NC contacts 1, max. incandescent lamp load 3000W, max. fluorescent lamp load 1190VA, max. fluorescent lamp load (duo circuit) 2552VA, max , A contactor is an electromagnetically actuated remote switch for high electrical power. A larger current can be switched by means of a smaller current. They ensure galvanic isolation between the control circuit and the switched circuit. Installation contactors of the HS series switch very quietly and are extremely low-noise. They are characterized by their long mechanical and electrical service life. Your magnetic coil is suitable for continuous operation (100% ED). Devices of this type are operated with a control voltage of 230 V AC. Properties: large range of different contacts, long electrical and mechanical life, extremely low noise, suitable auxiliary switch and sealing cap available, type of installation: quick mounting on mounting rail, any installation position, areas of application: installation contactors can be used in a variety of residential and commercial buildings as well as industrial plants. They switch incandescent lamps, fluorescent lamps, transformers for low-voltage halogen lamps, high-pressure mercury vapor lamps (HQL, HPL), metal halide lamps (HQI, HPI), low and high-pressure sodium vapor lamps, storage heaters or drives (motors). Notes: The designation of the devices in this series includes both the rated current (first pair of numbers) and the contact design (last pair of numbers): A HS 25-31 has e.g. g. a rated current of 25 A. three NO and one NC contact. The use of the spacer RD 05 is recommended for ambient temperatures above 40 degrees C.
... more
Rated operating voltage 400V
Rated operating current 24 A
Utilization category 1
Rated control voltage 230V
Voltage type of the operating voltage AC
Voltage type of the actuating voltage AC
Number of contacts as normally open 3
Number of contacts as opener 1
Max. Incandescent lamp load 3000 W
Max. Fluorescent lamp load 1190 VA
Slider for manual operation no
Width in division units 2
Depth 60 mm
Additional equipment possible yes
With day/night function no
Hum-free no
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Contactor 3 NO contacts, 1 NC contact - Installation contactor 230VAC 3 NO/ 1 NC HS 20-31 230V/50HZ"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.