Analog input - Analogue input for bus system 2-ch CAEE-02/01

Analog input - Analogue input for bus system 2-ch CAEE-02/01 – Eaton – 112240 – 4015081117987: Analogue input CAEE-02/01 Funkbus bus system, Other xComfort bus systems, Other mounting type, Width in modular units 2, Basic module design, With LED display, Number of inputs 2, With bus coupling, Degree of protection (IP) IP20, Min. depth of the device box 0mm, The dual analog input can record a wide variety of measured values (e.g. air quality, humidity, wind direction, etc.) using universal sensors (0-10VDC, 0-20mA, 4-20mA) or the temperature (PT1000 sensor, 265643) and the convenient Provide electrical installation. It is supplied via a separate 24VDC power pack (110772 or 110773, not included in the scope of delivery!!!). The 24VDC supply is looped through twice at the analog input and is therefore available to supply the active sensors. Depending on the connected sensor, the correct setting must be made for each channel. Attention: check max. load and correct supply of the sensors!!! Attention: For the exact measurement and display of the values using a reference measuring device, record the deviation and set the ''offset'' in the MRF. The device is installed in the junction box or installation box.