Protective tube, 8 bar, P G7, 57mm, brass - Solar immersion sleeve 1/2 inch ID=9mm MS 57

Eberle - MS 57 - Protective tube, 8 bar, P G7, 57mm, brass - Solar immersion sleeve 1/2 inch ID=9mm MS 57
Photo source: fig. possibly similar
Photo source: fig. possibly similar
MS 57 467409000001 4017254039645 EAN/GTIN DE 59919971 WEEE

£35.02 incl. VAT (£0.00)
£48.20 (-27.34% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Protective tube length 57 mm MS 57, nominal inner diameter connection=1/2 inch (15), inner... more
Protective tube, 8 bar, P G7, 57mm, brass - Solar immersion sleeve 1/2 inch ID=9mm MS 57 – Eberle – 467409000001 – 4017254039645: Protective tube length 57 mm MS 57, nominal inner diameter connection=1/2 inch (15), inner diameter=9 mm, insertion length=57 mm, protective tubes/immersion sleeves for sensors to measure the temperature in liquid media or aggressive environments. The protective tube has a PG 7 half screw connection and an R 1/2 inch screw-in thread.
... more

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Protective tube, 8 bar, P G7, 57mm, brass - Solar immersion sleeve 1/2 inch ID=9mm MS 57"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.