Water detector (water sensor RI SWM 3.2

Water detector (water sensor RI SWM 3.2 – EIBMARKT: The water detector is suitable for foot mounting. The detector stays on 4 plastic feet, the sensors are 0,5mm higher. The detector is not suitable to be continued under water. To take therefore, the optical sensor SWM 5 is better right. If the detector detects no water, the relay contact 3-4 is closed. The green LED indicates normal condition. If there is water or no power supply, the contact 3-4 is open. The red LED will notify when water is detected. Connecting cable 4 pole 0,14 qmm 1white : 24V AC/DC supply 2 brown: 24V AC/DC supply 3 green : N.C. contact alarm 4 yellow: N.C. contact alarm Indication : LED green : operation LED red : alarm In case of power failure the relay contact 3-4 is open. Detector 2x 2 detector electrodes Laying on the floor at the underside 0,5mm higher than frame foot. Output relays max. 1A, max. 60V. Measuring resistance of water detector sensitivity input ~ 0,8 – 1 M Ohm Electric connecting cable LIYY 4x0,14, length 4m. Cable outer diameter 3,7 mm. Power supply 24V AC/DC, +-15%. Power current max. 20mA. Isolation supply/contact 500 V. Casting compound DIN16945, DIN53505, DIN53482. Air humidity 0 – 95 % rh. Operating temperature 0 - +60°C. Storage temperature -30 - +80°C. Construction, cable entry PCB mount. Weight 130 g. Dimensions 46x34x28mm (WxLxH)