Conduit - elbow

You install your lines on the wall, in the floor or suspended under the ceiling. In order to be able to reach every corner of your house, you definitely have to walk around the corner more often than you would like. Of course, this makes an electrical installation complex and every bend is a potential weak point for damage from inside or outside. So reach for the eibabo bends for installation pipes. They reliably redirect your cables and ensure that the minimum bending radius of your lines is not exceeded. In our shop you can get installation bends made of plastic, aluminum or steel, for plugging in or with a thread, depending on which pipe system you use for your application. You can get installation pipes, connecting sleeves, branches, end pieces or sealing plugs to match.

Catalogue content:


In this eibabo® catalogue Installation pipes/cable protection tubes > Bend for installation tubes you will find items from the following product groups:

Item overview:

  • Aluminum arch
  • Aluminum bow
  • Aluminum sheet
  • Aluminum thread elbow
  • Armored steel elbow
  • Armored steel tube
  • Bend for installation pipes
  • Bend for installation tubes
  • Bow
  • Metal bow
  • Metal elbow
  • Metal threaded elbow
  • Metal threaded sleeve
  • Plastic arch
  • Plastic sheet
  • Plug-in elbow
  • Plug-in sheet
  • Plumbing elbow
  • Protective pipe elbow
  • Stainless steel bow
  • Steel arch
  • Steel pipe elbow
  • Steel pipe sleeve
  • Steel pipe socket
  • Steel Pipe Threaded Elbow
  • Steel tube elbow
  • Thread bend
  • Threaded socket


from the following manufacturers:

Manufacturer overview catalogue Conduit - elbow:

  • Fränkische
  • OBO


 
You install your lines on the wall, in the floor or suspended under the ceiling. In order to be able to reach every corner of your house, you definitely have to walk around the corner more often... read more »
Close window
Conduit - elbow
You install your lines on the wall, in the floor or suspended under the ceiling. In order to be able to reach every corner of your house, you definitely have to walk around the corner more often than you would like. Of course, this makes an electrical installation complex and every bend is a potential weak point for damage from inside or outside. So reach for the eibabo bends for installation pipes. They reliably redirect your cables and ensure that the minimum bending radius of your lines is not exceeded. In our shop you can get installation bends made of plastic, aluminum or steel, for plugging in or with a thread, depending on which pipe system you use for your application. You can get installation pipes, connecting sleeves, branches, end pieces or sealing plugs to match.

Catalogue content:


In this eibabo® catalogue Installation pipes/cable protection tubes > Bend for installation tubes you will find items from the following product groups:

Item overview:

  • Aluminum arch
  • Aluminum bow
  • Aluminum sheet
  • Aluminum thread elbow
  • Armored steel elbow
  • Armored steel tube
  • Bend for installation pipes
  • Bend for installation tubes
  • Bow
  • Metal bow
  • Metal elbow
  • Metal threaded elbow
  • Metal threaded sleeve
  • Plastic arch
  • Plastic sheet
  • Plug-in elbow
  • Plug-in sheet
  • Plumbing elbow
  • Protective pipe elbow
  • Stainless steel bow
  • Steel arch
  • Steel pipe elbow
  • Steel pipe sleeve
  • Steel pipe socket
  • Steel Pipe Threaded Elbow
  • Steel tube elbow
  • Thread bend
  • Threaded socket


from the following manufacturers:

Manufacturer overview catalogue Conduit - elbow:

  • Fränkische
  • OBO
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

2 From 11
No results were found for the filter!
RECOMMENDED
Fränkische - ABS-E 50 - Aluminum bow - Bend for conduit 50mm ABS-E 50
£14.29 incl. VAT (£0.00)

*

plus shipping
(£38.85 RRP***)
Aluminum bow - Bend for conduit 50mm
Fränkische
| ABS-E 50
RECOMMENDED
Fränkische - SB-E 20 sw lack. - Steel tube threaded elbow for StaroGew.ES - Bend for conduit 20mm SB-E 20 sw lack.
£9.04 incl. VAT (£0.00)

*

plus shipping
(£19.18 RRP***)
Steel tube threaded elbow for StaroGew.ES - Bend for conduit 20mm
Fränkische
| SB-E 20 sw lack.
RECOMMENDED
Fränkische - SB-E-V 25 feuervz. - Steel tube threaded elbow for StaroGew.ESV - Conduit elbow 25mm SB-E-V 25 feuervz.
£12.80 incl. VAT (£0.00)

*

plus shipping
(£32.01 RRP***)
Steel tube threaded elbow for StaroGew.ESV - Conduit elbow 25mm
Fränkische
| SB-E-V 25 feuervz.
RECOMMENDED
Hegler Plastik - 9961032 - Aluminum plug-in elbow ALU-ES DN32 9961032
£5.63 incl. VAT (£0.00)

*

Aluminum plug-in elbow ALU-ES DN32
Hegler Plastik
| 9961032
RECOMMENDED
Fränkische - SBS-E-V 32 feuervz. - Tubular steel elbow for StaroSteck-ES - Conduit elbow 32mm SBS-E-V 32 feuervz.
£16.67 incl. VAT (£0.00)

*

plus shipping
(£37.08 RRP***)
Tubular steel elbow for StaroSteck-ES - Conduit elbow 32mm
Fränkische
| SBS-E-V 32 feuervz.
RECOMMENDED
Fränkische - SBS-E-V 25 feuervz. - Tubular steel elbow for StaroSteck-ESV - Conduit elbow 25mm SBS-E-V 25 feuervz.
£13.74 incl. VAT (£0.00)

*

plus shipping
(£30.55 RRP***)
Tubular steel elbow for StaroSteck-ESV - Conduit elbow 25mm
Fränkische
| SBS-E-V 25 feuervz.
RECOMMENDED
Hegler Plastik - 9811025 - Plug-in elbow EPKM, EPKS DN25 9811025
£1.93 incl. VAT (£0.00)

*

Plug-in elbow EPKM, EPKS DN25
Hegler Plastik
| 9811025
RECOMMENDED
Fränkische - SBSKu-EM 50 - Plastic plug-in sheet for FPKu-EM-F - Bend for conduit 50mm SBSKu-EM 50
£22.90 incl. VAT (£0.00)

*

plus shipping
(£30.80 RRP***)
Plastic plug-in sheet for FPKu-EM-F - Bend for conduit 50mm
Fränkische
| SBSKu-EM 50
RECOMMENDED
Fränkische - ABG-E 32 - Aluminum threaded elbow - Bend for conduit 32mm ABG-E 32
£15.33 incl. VAT (£0.00)

*

plus shipping
(£36.57 RRP***)
Aluminum threaded elbow - Bend for conduit 32mm
Fränkische
| ABG-E 32
RECOMMENDED
Hegler Plastik - 9811040 - Plug-in elbow EPKM, EPKS DN40 9811040
£6.36 incl. VAT (£0.00)

*

Plug-in elbow EPKM, EPKS DN40
Hegler Plastik
| 9811040
RECOMMENDED
Fränkische - SBSKu-EM 20 - Plastic plug-in sheet for FPKu-EM-F - Bend for conduit 20mm SBSKu-EM 20
£2.21 incl. VAT (£0.00)

*

plus shipping
(£3.07 RRP***)
Plastic plug-in sheet for FPKu-EM-F - Bend for conduit 20mm
Fränkische
| SBSKu-EM 20
RECOMMENDED
Fränkische - ABG-E 63 - Aluminum threaded elbow - Bend for conduit 63mm ABG-E 63
£38.70 incl. VAT (£0.00)

*

plus shipping
(£123.09 RRP***)
Aluminum threaded elbow - Bend for conduit 63mm
Fränkische
| ABG-E 63
2 From 11
Viewed from you