Conduit end grommet

Your installation rarely corresponds to the length of the installation pipes you use. As a result, you always have to cut the last pipe to the required size. If you use pliers or a saw for this, a burr will appear on the cutting edge, which in the worst case can chafe the insulation of your cables and lines. Then the conductors are exposed and pose a potential safety risk. To prevent this, provide the ends of your installation pipes with end sleeves and thus create a proper pipe termination and edge protection. In the eibabo technology store there are inexpensive end sleeves made of high-quality plastic and aluminum for installation pipes of different dimensions. If you need more, simply use the larger packaging units.

Catalogue content:


In this eibabo® catalogue Installation pipes/cable protection tubes > Terminal sleeve for installation tubes you will find items from the following product groups:

Item overview:

  • Aluminum plug
  • Cable protection
  • Closure
  • Conduit end socket
  • Conduit grommet
  • End socket for installation pipes
  • End spout
  • Foundation pipe
  • Grommet
  • Metal end spout
  • Metal pipe end fitting
  • Pipe edge protection
  • Pipe end socket
  • Plastic end cap
  • Plug-in socket
  • Stainless steel end spout
  • Stainless steel plug
  • Steel armored pipe end socket
  • Terminal sleeve for installation tubes
  • Threaded end socket


from the following manufacturers:

Manufacturer overview catalogue Conduit end grommet:

  • Fränkische
  • Kleinhuis
  • OBO
  • Rico


 
Your installation rarely corresponds to the length of the installation pipes you use. As a result, you always have to cut the last pipe to the required size. If you use pliers or a saw for this, a... read more »
Close window
Conduit end grommet
Your installation rarely corresponds to the length of the installation pipes you use. As a result, you always have to cut the last pipe to the required size. If you use pliers or a saw for this, a burr will appear on the cutting edge, which in the worst case can chafe the insulation of your cables and lines. Then the conductors are exposed and pose a potential safety risk. To prevent this, provide the ends of your installation pipes with end sleeves and thus create a proper pipe termination and edge protection. In the eibabo technology store there are inexpensive end sleeves made of high-quality plastic and aluminum for installation pipes of different dimensions. If you need more, simply use the larger packaging units.

Catalogue content:


In this eibabo® catalogue Installation pipes/cable protection tubes > Terminal sleeve for installation tubes you will find items from the following product groups:

Item overview:

  • Aluminum plug
  • Cable protection
  • Closure
  • Conduit end socket
  • Conduit grommet
  • End socket for installation pipes
  • End spout
  • Foundation pipe
  • Grommet
  • Metal end spout
  • Metal pipe end fitting
  • Pipe edge protection
  • Pipe end socket
  • Plastic end cap
  • Plug-in socket
  • Stainless steel end spout
  • Stainless steel plug
  • Steel armored pipe end socket
  • Terminal sleeve for installation tubes
  • Threaded end socket


from the following manufacturers:

Manufacturer overview catalogue Conduit end grommet:

  • Fränkische
  • Kleinhuis
  • OBO
  • Rico
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

2 From 8
No results were found for the filter!
RECOMMENDED
3D
Fränkische - E-Ku-E 20 - Gray plastic end cap - End-spout for tube 20mm E-Ku-E 20
£0.28 incl. VAT (£0.00)

*

plus shipping
(£0.88 RRP***)
Gray plastic end cap - End-spout for tube 20mm
Fränkische
| E-Ku-E 20
RECOMMENDED
3D
Kleinhuis - 1590M20 - End-spout for tube 20mm 1590M20
£0.25 incl. VAT (£0.00)

*

End-spout for tube 20mm
Kleinhuis
| 1590M20
RECOMMENDED
3D
Fränkische - E-Ku-E 25 sw UV - Black plastic end cap, UV-resistant - End-spout for tube 25mm E-Ku-E 25 sw UV
£0.34 incl. VAT (£0.00)

*

plus shipping
(£1.05 RRP***)
Black plastic end cap, UV-resistant - End-spout for tube 25mm
Fränkische
| E-Ku-E 25 sw UV
RECOMMENDED
3D
Kleinhuis - 1590M25 - End-spout for tube 25mm 1590M25
£0.33 incl. VAT (£0.00)

*

End-spout for tube 25mm
Kleinhuis
| 1590M25
RECOMMENDED
3D
Fränkische - AES-E 50 - Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 50mm AES-E 50
£4.72 incl. VAT (£0.00)

*

plus shipping
(£29.33 RRP***)
Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 50mm
Fränkische
| AES-E 50
RECOMMENDED
3D
Fränkische - E-Ku-E 40 sw UV - Black plastic end cap, UV-resistant - End-spout for tube 40mm E-Ku-E 40 sw UV
£0.64 incl. VAT (£0.00)

*

plus shipping
(£2.05 RRP***)
Black plastic end cap, UV-resistant - End-spout for tube 40mm
Fränkische
| E-Ku-E 40 sw UV
RECOMMENDED
3D
Fränkische - E-Ku-ET 20 - Gray plastic end cap - End-spout for tube 20mm E-Ku-ET 20
£21.87 incl. VAT (£0.00)

*

(For 100 Piece) plus shipping
(£88.04 RRP***)
Gray plastic end cap - End-spout for tube 20mm
Fränkische
| E-Ku-ET 20
x 100 Piece
Add to wishlist
RECOMMENDED
3D
Fränkische - E-Ku-ET 25 - Gray plastic end cap - End-spout for tube 25mm E-Ku-ET 25
£25.13 incl. VAT (£0.00)

*

(For 100 Piece) plus shipping
(£104.94 RRP***)
Gray plastic end cap - End-spout for tube 25mm
Fränkische
| E-Ku-ET 25
x 100 Piece
Add to wishlist
RECOMMENDED
Fränkische - E-Ku-ET 32 - Gray plastic end cap - End-spout for tube 32mm E-Ku-ET 32
£16.35 incl. VAT (£0.00)

*

(For 50 Piece) plus shipping
(£75.15 RRP***)
Gray plastic end cap - End-spout for tube 32mm
Fränkische
| E-Ku-ET 32
x 50 Piece
Add to wishlist
RECOMMENDED
3D
Kleinhuis - 1590M16 - End-spout for tube 16mm 1590M16
£15.03 incl. VAT (£0.00)

*

(For 100 Piece) plus shipping
End-spout for tube 16mm
Kleinhuis
| 1590M16
x 100 Piece
Add to wishlist
RECOMMENDED
RECOMMENDED
FINTECH - IEE 32 AL - Aluminum end sleeve AL-ET M32 (452932) IEE 32 AL
£3.53 incl. VAT (£0.00)

*

Aluminum end sleeve AL-ET M32 (452932)
FINTECH
| IEE 32 AL
2 From 8
Viewed from you