Small distributor - accessories

According to the current standards, the structure of electrical distribution boxes consists of certain basic elements. However, as in most cases, there is no limited number of standard solutions. Here, too, individual implementations that are geared to the field of application, the building and other technical requirements must be found again and again. In our eibabo product range for accessories for small distributors, you have a very large selection of high-quality accessories at your disposal. You will find a variety of different modules for data transmission. We also carry sockets for the cable connection. These can be rotated three times and have increased protection against accidental contact. You can get high-quality assembly sets, patch panels and a wide variety of clamps at good prices.

Catalogue content:


In this eibabo® catalogue Distribution boards > Accessories for small distribution board you will find items from the following product groups:

Item overview:

  • Accessories for small distribution board
  • Accessories for small distributors
  • Accessories/spare parts for small distribution board
  • Bell transformer connection block
  • Clamp
  • Clip
  • Connecting comb
  • Connector fuse switch disconnector housing
  • Coupling piece for protection switch disconnector
  • Door
  • Fuse cartridge
  • Guide slide
  • High-voltage group kit
  • Installation kit
  • Insulating support
  • Insulation hood phase rail
  • Isolation cap phase busbar
  • Mounting frame
  • Mounting kit
  • Mounting set
  • Mounting set cooker group
  • Mounting set power current group
  • Page module
  • Separator slide
  • Spare parts for small distribution board
  • Stove group kit
  • Supplementary component for small distributors
  • Switching bridge


from the following manufacturers:

Manufacturer overview catalogue Small distributor - accessories:

  • ABB
  • ABN
  • Eaton
  • Hager
  • Mersen
  • OBO
  • Phoenix
  • Rittal
  • Schneider Electric
  • Siemens
  • Spelsberg
  • Striebel & John
  • Walther


 
According to the current standards, the structure of electrical distribution boxes consists of certain basic elements. However, as in most cases, there is no limited number of standard solutions.... read more »
Close window
Small distributor - accessories
According to the current standards, the structure of electrical distribution boxes consists of certain basic elements. However, as in most cases, there is no limited number of standard solutions. Here, too, individual implementations that are geared to the field of application, the building and other technical requirements must be found again and again. In our eibabo product range for accessories for small distributors, you have a very large selection of high-quality accessories at your disposal. You will find a variety of different modules for data transmission. We also carry sockets for the cable connection. These can be rotated three times and have increased protection against accidental contact. You can get high-quality assembly sets, patch panels and a wide variety of clamps at good prices.

Catalogue content:


In this eibabo® catalogue Distribution boards > Accessories for small distribution board you will find items from the following product groups:

Item overview:

  • Accessories for small distribution board
  • Accessories for small distributors
  • Accessories/spare parts for small distribution board
  • Bell transformer connection block
  • Clamp
  • Clip
  • Connecting comb
  • Connector fuse switch disconnector housing
  • Coupling piece for protection switch disconnector
  • Door
  • Fuse cartridge
  • Guide slide
  • High-voltage group kit
  • Installation kit
  • Insulating support
  • Insulation hood phase rail
  • Isolation cap phase busbar
  • Mounting frame
  • Mounting kit
  • Mounting set
  • Mounting set cooker group
  • Mounting set power current group
  • Page module
  • Separator slide
  • Spare parts for small distribution board
  • Stove group kit
  • Supplementary component for small distributors
  • Switching bridge


from the following manufacturers:

Manufacturer overview catalogue Small distributor - accessories:

  • ABB
  • ABN
  • Eaton
  • Hager
  • Mersen
  • OBO
  • Phoenix
  • Rittal
  • Schneider Electric
  • Siemens
  • Spelsberg
  • Striebel & John
  • Walther
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 37
No results were found for the filter!
RECOMMENDED
3D
Hager - VZ314RJ - RJ45 module, 10GBit C6A, Class EA VZ314RJ
£13.40 incl. VAT (£0.00)

*

plus shipping
(£21.88 RRP***)
RJ45 module, 10GBit C6A, Class EA
Hager
| VZ314RJ
RECOMMENDED
3D
Hager - UZ00K1 - Carrier for SSK blocks univers N - Accessory for terminal UZ00K1
£3.10 incl. VAT (£0.00)

*

plus shipping
(£5.07 RRP***)
Carrier for SSK blocks univers N - Accessory for terminal
Hager
| UZ00K1
RECOMMENDED
3D
Hager - KN00A - SSK, adapter, empty - Accessory for terminal KN00A
£2.51 incl. VAT (£0.00)

*

plus shipping
(£4.09 RRP***)
SSK, adapter, empty - Accessory for terminal
Hager
| KN00A
RECOMMENDED
3D
Hager - VZ00AS - 3-way socket, 90 degrees rotatable - Socket outlet for distribution board VZ00AS
£70.61 incl. VAT (£0.00)

*

plus shipping
(£115.36 RRP***)
3-way socket, 90 degrees rotatable - Socket outlet for distribution board
Hager
| VZ00AS
RECOMMENDED
3D
Hager - VZ711 - Terminal carrier,Volta,Vector for SSK - Accessory for terminal VZ711
£3.16 incl. VAT (£0.00)

*

plus shipping
(£5.16 RRP***)
Terminal carrier,Volta,Vector for SSK - Accessory for terminal
Hager
| VZ711
RECOMMENDED
3D
Hager - VZ456N (VE10) - N terminal Volta QC, for DIN rail - Screw less terminal VZ456N (VE10)
£14.32 incl. VAT (£0.00)

*

plus shipping
(£22.06 RRP***)
N terminal Volta QC, for DIN rail - Screw less terminal
Hager
| VZ456N (VE10)
RECOMMENDED
3D
Hager - FZ12MM - Patch panel 12x with 6xRJ45 modules - Front-/ Patch panel FZ12MM
£88.13 incl. VAT (£0.00)

*

plus shipping
(£144.00 RRP***)
Patch panel 12x with 6xRJ45 modules - Front-/ Patch panel
Hager
| FZ12MM
RECOMMENDED
3D
Hager - FZ276 - Cavity wall set - Accessory for enclosure FZ276
£17.52 incl. VAT (£0.00)

*

plus shipping
(£31.93 RRP***)
Cavity wall set - Accessory for enclosure
Hager
| FZ276
RECOMMENDED
3D
Hager - VZ405N - Cavity wall mounting set Volta - Accessory for distriburion board VZ405N
£15.68 incl. VAT (£0.00)

*

plus shipping
(£25.62 RRP***)
Cavity wall mounting set Volta - Accessory for distriburion board
Hager
| VZ405N
RECOMMENDED
3D
Hager - VZ315FF - COAX module F/ F socket - Accessory for distriburion board VZ315FF
£12.85 incl. VAT (£0.00)

*

plus shipping
(£20.99 RRP***)
COAX module F/ F socket - Accessory for distriburion board
Hager
| VZ315FF
RECOMMENDED
3D
Hager - VZ530N - Cable entry Volta - Accessory for distriburion board VZ530N
£3.81 incl. VAT (£0.00)

*

plus shipping
(£6.23 RRP***)
Cable entry Volta - Accessory for distriburion board
Hager
| VZ530N
RECOMMENDED
3D
Hager - VZ308N - Door handle Volta - Special lock system for enclosure VZ308N
£6.69 incl. VAT (£0.00)

*

plus shipping
(£10.94 RRP***)
Door handle Volta - Special lock system for enclosure
Hager
| VZ308N
1 From 37
Viewed from you