Current limiting relay 1 NO contact 16A/250V - Current limiter 1200VA SBR12-230V/240µF

Current limiting relay 1 NO contact 16A/250V - Current limiter 1200VA SBR12-230V/240µF – Eltako – 22100430 – 4010312205457: Current limiting relay 1 NO contact 16A/250V SBR12-230V/240µF Max. apparent power 1200VA, mounting type DIN rail, rated conditional short-circuit current Iq 0.02kA, rated continuous current Iu 16A, current limiting relay with 1 NO contact 16A/250VAC. No standby loss. 1 division unit. Maximum capacitive load 240 microfarads after rectifier (e.g. energy-saving lamps and electronic ballasts) or 120 microfarads directly on the mains (e.g. parallel-compensated fluorescent lamps). Limiting resistance 12 ohms, limiting duration approx. 15ms. The inrush current pulse of energy-saving lamps, fluorescent lamps and compact fluorescent lamps is limited to 20A by briefly (approx. 15ms) switching on high-load resistors (12 ohms). The current limiting relay is connected downstream of the relay contact of a switching device to be protected. Continuous load max. 1200W, maximum switching frequency 600/h. Explanation of the capacitive load specification: The specification of the maximum capacitive load directly on the mains must be observed, for example for parallel-compensated fluorescent lamps or conventional ballasts. The capacitor for each lamp, which is located parallel to the mains, determines the correct dimensioning. The specification of the maximum capacitive load after the rectifier must be taken into account, for example for fluorescent lamps with electronic ballasts and energy-saving lamps. A replacement capacity of approx. 10 microfarads per bulb can be expected.