Electronic ballast control dimmer switch, 1-10V SDS61/1-10V

SDS61/1-10V 61100800 4010312109496 EAN/GTIN DE 30298319 WEEE

Our best price
£31.74 incl. VAT (£0.00)
£58.43 (-45.68% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Control dimmer switch 1-10V, f.EVGs SDS61/1-10V compilation others, touch operation type of... more
Electronic ballast control dimmer switch, 1-10V SDS61/1-10V – Eltako – 61100800 – 4010312109496: Control dimmer switch 1-10V, f.EVGs SDS61/1-10V compilation others, touch operation type of operation, load type capacitive load, light value memory, can be used with button, can be used with motion detector, can be used with presence detector, can be used with timer/timer, flush-mounted type of installation, other type of attachment , material plastic, material quality thermoplastic, halogen-free, surface other, design of the surface matt, color blue, control voltage 230 ... 230V, connection type screw terminal, core cross section 4 ... 4mm², device width 45mm, device height 45mm, device depth 33mm, min. depth of Device socket 33mm, 1-10V control dimmer switch 1-10V for electronic ballasts. 1 NO contact not potential-free 600VA and 1-10V control output 40mA. Standby loss only 1 watt. Adjustable dimming speed. With children's room and snooze switch. With button or switch control. For flush mounting. 45mm long, 45mm wide, 33mm deep. Switching in the zero crossing to protect the contacts. Also for controlling LED converters with passive 1-10V interface without auxiliary voltage up to 0.6mA. Above that with auxiliary voltage. Switching and control voltage 230V. The latest hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. The load is switched on and off with a bistable relay at the EVG output. Switching capacity of fluorescent lamps or LV halogen lamps with electronic ballast 600VA. Due to the use of a bistable relay, there is no coil power loss and no heating as a result, even when switched on. After installation, wait for the brief automatic synchronization before the switched consumer is connected to the mains. Short control commands switch on/off, permanent control changes the brightness up to the maximum value. An interruption of the control changes the dimming direction. The set brightness level is saved when the device is switched off. In the event of a power failure, the switching position and the brightness level are saved and, if necessary, switched on when the supply voltage returns. The dimming speed can be set with the dimming speed rotary switch (only when controlled with a button). In the event that light switches cannot be replaced by light buttons, the rotary switch can be set to the switch symbol on the right stop: If the closed switch is briefly opened again, it is dimmed until it is briefly opened again. A change in the dimming direction takes place automatically at the two vertices. In addition, the direction can be changed by briefly opening the switch twice. With children's room circuit (only when controlled with a button): When switching on by pressing the button for a longer period of time, it is switched on with the lowest brightness after approx. With snooze function (only when controlled with a button): A double pulse dims the lighting from the current dimming setting down to minimum brightness and then switches it off. The maximum dimming time of 60 minutes depends on the current dimming position and the set minimum brightness and can be shortened accordingly. You can switch off at any time during the dimming process by briefly pressing the button. A long press during the dimming process dims up and ends the snooze mode.
... more
Compilation other
Of operation Tip button
App control via Bluetooth no
Dimming Phase control no
Dimming Phase section no
Series dimmer no
Load type capacitive load
Extension input no
Light value memory yes
Suitable with button yes
Usable with motion detector yes
Suitable with presence detector yes
Usable with timer / timer yes
Suitable with radio button no
Usable with IR button no
Mounting Flush
Mounting other
Material Plastic
Material quality Thermoplastic
Halogen free yes
Surface protection other
Execution of the surface frosted
Colour blue
Transparent no
Control voltage 230V
Rated capacity resistive load 400W
Rated capacity inductive load 400 VA
Rated capacity capacitive load 400 VA
Max. switching capacity LED 400W
Connection Screw terminal
Core cross-section 4 mm²
Device width 45 mm
Device height 45 mm
Device depth 33 mm
Min. depth of the device socket 33 mm
Compatible with Apple HomeKit no
Compatible with Google Assistant no
Compatible with Amazon Alexa no
IFTTT support available no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Electronic ballast control dimmer switch, 1-10V SDS61/1-10V"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.