Three-phase meter - Direct kilowatt-hour meter 10A DSZ15DE-3x80A

DSZ15DE-3x80A 28380615 4010312501719 EAN/GTIN DE 30298319 WEEE

Our best price
£71.74 incl. VAT (£0.00)
£103.47 (-30.67% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Three-phase meter DSZ15DE-3x80A Electronic meter type, rated current (In) 10A, maximum current... more
Three-phase meter - Direct kilowatt-hour meter 10A DSZ15DE-3x80A – Eltako – 28380615 – 4010312501719: Three-phase meter DSZ15DE-3x80A Electronic meter type, rated current (In) 10A, maximum current (Imax) 80A, rated voltage (Un) NL 230 ... 230V, rated voltage (Un) LL 400 ... 400V, frequency 50 ... 50Hz, accuracy class B , Polart four-wire, direct measurement version, active power energy type, suitable for purchase/supply, two-tariff tariff version, backstop, optical pulse output, pulse type S0, pulse rate 1000 ... 1000imp/kWh (kvarh), digital display type, REG mounting type, width in modular units 4, Design of the interface others, number of digits 7, degree of protection (IP) IP20, maximum current 3x80A, standby loss only 0.5 watts per path. Modular installation device for mounting on mounting rail DIN-EN 60715 TH35. 4 pitch units = 70mm wide, 58mm deep. Accuracy class B (1%). With S0 interface. The directly measuring three-phase meter measures the active energy based on the currents flowing between the inputs and outputs. The self-consumption of only a maximum of 0.5 watts effective power per path is not measured and not displayed. 1, 2 or 3 phase conductors with currents of up to 80A can be connected. The starting current is 4OmA. The N connection must be present. The 7-segment LC display can be read twice within two weeks even without a power supply. The power consumption is shown on the display with a bar that flashes 100 times per kWh. Can also be used as a 2-tariff counter as standard: When 230V is applied to terminals E1/E2, a switch is made to a second tariff. To the right of the display are the MODE and SELECT buttons, which are used to scroll through the menu in accordance with the operating instructions. First, the backlight turns on. Then the total active energy per tariff, the active energy of the resettable memory RS1 or RS2 as well as the instantaneous values of power, voltage and current per phase conductor can be displayed. Error message (false): If the phase conductor is missing or the current direction is wrong, false and the corresponding phase conductor are shown on the display.
... more
Counter type electronic
Rated current (in) 10 A
Maximum current (Imax) 80 A
Rated voltage (Un) NL 230V
Rated voltage (Un) LL 400V
Frequency 50 Hz
Accuracy class B
Polart Four conductors
Execution Direct measurement
Of energy Active power
Suitable for Purchase / delivery
Rate design Two tariff
Backstop yes
Calibrated no
Pulse output optical
Pulse type S0
Pulse rate 71,9298 lm/W
Display digital
Mounting REG
Width in division units 4
Width 70 mm
Depth 58 mm
Height 82 mm
Execution of the interface other
Number of digits 7
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Three-phase meter - Direct kilowatt-hour meter 10A DSZ15DE-3x80A"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.