Radio control unit for electronic ballast 1-10V - Radio receiver 868MHz FSG71/1-10V

FSG71/1-10V 30100841 4010312316283 EAN/GTIN DE 30298319 WEEE

Our best price
£76.61 incl. VAT (£0.00)
£102.63 (-25.35% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Radio control device for electronic ballast 1-10V FSG71/1-10V Suitable for dimmers, in the... more
Radio control unit for electronic ballast 1-10V - Radio receiver 868MHz FSG71/1-10V – Eltako – 30100841 – 4010312316283: Radio control device for electronic ballast 1-10V FSG71/1-10V Suitable for dimmers, in the housing, power supply 230 V AC, touch mode, other type of installation, material plastic, material quality thermoplastic, halogen-free, other surface, surface finish matt, other type of attachment , color white, suitable for degree of protection (IP) IP20, radio frequency 868MHz, number of commands 32, dimmer switch control device for electronic ballast 1-10V, 1 NO contact not potential-free 600VA and 1-10V control output 40mA. Minimum brightness and dimming speed adjustable. With children's room snooze and light alarm switch as well as constant light control and master-slave operation. Additionally with light scene control via PC or with radio buttons. Encrypted radio, bidirectional radio and repeater function can be switched on. Standby loss only 1.4 watts. Installation in the 230V mains connection line, for example in false ceilings and lights. 166mm long, 46mm wide and 31mm deep. With cable strain relief. Switching in the zero crossing to protect the contacts. Also for controlling LED converters with passive 1-10V interface without auxiliary voltage up to 0.6mA. Above that with auxiliary voltage. The set brightness level is saved when the device is switched off (memory). In the event of a power failure, the switching position and the brightness level are saved and, if necessary, switched on when the supply voltage returns. The minimum brightness (fully dimmed) can be set with the %lamp rotary switch. The dimming speed can be set with the dim-speed rotary switch. The load is switched on and off with a bistable relay at the EVG output. Switching capacity of fluorescent lamps or LV halogen lamps with electronic ballast 600VA. Due to the use of a bistable relay, there is no coil power loss and no heating as a result, even when switched on. After installation, wait for the brief automatic synchronization before the switched consumer is connected to the mains. The buttons can be taught in either as direction buttons or as universal buttons. With children's room switch and snooze switch. Wake-up light circuit: An appropriately taught-in radio signal from a timer starts the wake-up function by switching on the lighting with the lowest brightness and slowly dimming it up to maximum brightness. Depending on the dimming speed set with the dim-speed rotary switch, the wake-up time is between 30 and 60 minutes. The dimming up is stopped by briefly pressing (e.g. a radio hand-held transmitter). Children's room circuit, if activated: When switching on with a longer button press (universal button or direction button at the top), after approx. 1 second it is switched on with the lowest brightness and, as long as the button is pressed, it is slowly dimmed up without changing the brightness level last saved. The LED under the top one Rotary switch accompanies the learning process according to the operating instructions and indicates control commands during operation by flashing briefly.
... more
Suitable for dimmers yes
Suitable for pulse presser no
Suitable for roller shutter switches no
Suitable for blinds switch no
Suitable for blind / roller shutter switches no
Suitable for switches no
In the case yes
In the tube socket housing no
As a module / board no
Power supply 230V AC
Button mode yes
Switching operation no
With radio hand transmitter no
With radio coding device no
With wireless pushbutton no
Mounting other
Material Plastic
Material quality Thermoplastic
Halogen free yes
Surface protection other
Execution of the surface frosted
Mounting other
Colour white
Transparent no
Suitable for degree of protection (IP) IP20
Radio frequency 868 MHz
Number of commands 32
Compatible with Apple HomeKit no
Compatible with Google Assistant no
Compatible with Amazon Alexa no
IFTTT support available no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Radio control unit for electronic ballast 1-10V - Radio receiver 868MHz FSG71/1-10V"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.