Radio repeater - Repeater for home automation FRP61-230V

Radio repeater - Repeater for home automation FRP61-230V – Eltako – 30000350 – 4010312300251: Radio repeater FRP61-230V bus system radio bus, other bus systems without, type of installation flush-mounted, nominal voltage 230V, degree of protection (IP) IP20, min. depth of the device box 33mm, 1- and 2-level radio repeater. Standby loss only 0.9 watts. For flush mounting. 45mm long, 45mm wide, 33mm deep. This repeater is only required if the structural conditions prevent undisturbed reception or the distance between the wireless pushbutton and the receiver is too great. The 1-level mode is set at the factory. Only the radio signals from sensors are received, checked and sent on with full transmission power. Radio signals from other repeaters are ignored to reduce the amount of data. The rotary switch can be used to switch to 2-level mode. Now, in addition to the radio signals from sensors, the radio signals from another 1-level repeater are also processed. A radio signal can thus be received and amplified a maximum of 2 times. The LED indicates incoming radio signals by flashing briefly. Radio repeaters do not have to be taught in. They receive and amplify the radio signals from all radio sensors in their reception area.