Electricity meter transmitter module - Energy meter for bus system FSS12-12V DC

Electricity meter transmitter module - Energy meter for bus system FSS12-12V DC – Eltako – 30100600 – 4010312301944: Electricity meter transmitter module FSS12-12V DC bus system radio bus, other bus systems without, version energy meter, connection type direct, approval according to PTB, S0 pulse interface one, radio electricity meter transmitter module for connection to the S0 interface of many single-phase meters and three-phase meters. Standby loss only 0.5 watts. With load shedding relay 1 NO contact, potential-free 4A/250V and with exchangeable transmitting antenna. If required, a radio antenna FA250 can be connected. DIN rail mounted device for mounting on DIN rail, 2 modules = 36mm wide, 58mm deep. The electricity meter transmitter module FSS12 evaluates the signals of the S0 interface of an electricity meter and sends wireless telegrams with the consumption and the meter reading to the Eltako wireless network for evaluation on the computer with the visualization and control software GFVS 4.0 and GFVS-Energy. In the case of three-phase meters, additional information about high tariff HT or low tariff NT, provided that the E1/E2 terminals of a three-phase meter are connected to E1/E2 of the FSS12. From the production week 42/2012 additionally with a freely selectable pulse rate. GFVS-Energy supports up to 100 transmitter modules, GFVS 3.0 up to 250 transmitter modules. The 12V DC power supply is provided with a switching power supply unit SNT12-230V/12V DC-1A, which is only 1 module wide. If the relay of the FSS12 is switched on, 0.6 watts are required. The setting and display is divided into 3 fields.