Wireless button white - Remote control for switching device FT55R-weiß

Wireless button white - Remote control for switching device FT55R-weiß – Eltako – 30000225 – 4010312313985: Wireless pushbutton white FT55R-white wall transmitter, wireless signal transmission, number of channels 4, surface-mounting type, material plastic, material quality thermoplastic, halogen-free, surface untreated, surface design matt, color cream white (electrical white), range 30m, suitable for switches, suitable for dimmers , Suitable for shutter switch, Suitable for display element, radio 4-channel button 55x55mm for Busch Reflex and Duro frames. Generates the energy for radio telegrams itself when a button is pressed, therefore without a connecting cable and no standby loss. With rocker and double rocker. The scope of delivery includes a rocker, a double rocker, a mounting frame, a mounting plate (all the same color), the radio module and an adhesive film. Wireless pushbuttons with a rocker can send two signals that can be evaluated: press the rocker up and press the rocker down. Wireless pushbuttons with double rocker can send four signals that can be evaluated: Press two rockers up and down. The mounting plate can be screwed onto a flat surface or glued to the wall, glass or furniture using the adhesive film provided. The sleeves in the box are used for screw fastening over a 55mm switch box. The double rocker is snapped onto the wireless module ex works. If this is to be exchanged for the large rocker, then pull the rocker halves forward and do not bend towards the middle. Then snap on the large rocker so that the markings 0 and I on the back match the radio module. When gluing, first glue the set of retaining plate with frame and mounting frame - with the catches at the top and bottom. Then snap in the radio module set with rocker - labeling 0 on the back is always at the top. Before screwing on, detach the frame with the mounting frame from the retaining plate. To do this, press the catches on the retaining plate outwards. Then screw on the retaining plate - with the catches at the top and bottom - snap on the frame with the mounting frame and snap in the radio module set with rocker - labeling 0 on the back always at the top. For screw fastening we recommend sheet metal countersunk screws 2.9x25mm, DIN 7982 C. Both with dowels 5x25mm and on 55mm switch boxes. The wireless module contained in the wireless pushbutton can be taught-in in encrypted form in all encryptable actuators of the 61 and 71 series, as well as in the FAM14, in accordance with the operating instructions. The wireless pushbutton encryption rocker FTVW is required for this. Encryptable actuators bear the key pictogram.