Radio repeater - Repeater for home automation FRP62-230V

Radio repeater - Repeater for home automation FRP62-230V – Eltako – 30000534 – 4010312320310: Radio repeater FRP62-230V bus system radio bus, other bus systems without, type of installation flush-mounted, nominal voltage 230V, degree of protection (IP) IP20, min. depth of the device box 22mm, 1- and 2-level radio repeater. Standby loss only 0.7 watts. For flush mounting. 49x51mm, 20mm deep. The connection terminals are plug-in terminals for conductor cross-sections from 0.2 mqm to 2.5 mqm. Supply voltage 230V. This repeater is only required if the structural conditions prevent undisturbed reception or the distance between the wireless pushbutton and the receiver is too great. If the supply voltage is only connected to terminals L and N, 1-level mode is active. Only the radio signals from sensors are then received, checked and sent on at full transmission power. Radio signals from other repeaters are ignored to reduce the amount of data. If the phase is connected to the level 2 terminal in addition to the supply voltage, the 2-level mode is active. Now, in addition to the radio signals from sensors, the radio signals from 1-level repeaters are also processed. A radio signal can thus be received and amplified a maximum of 2 times. Radio repeaters do not have to be taught in. They receive and amplify the radio signals from all radio sensors in their reception area.