Outdoor radio repeater - Repeater for home automation FARP60-230V

Outdoor radio repeater - Repeater for home automation FARP60-230V – Eltako – 30000353 – 4010312310137: Outdoor wireless repeater FARP60-230V bus system wireless bus, other bus systems without, mounting type surface-mounted, nominal voltage 230V, protection class (IP) IP54, outdoor wireless repeater 1 and 2 levels, 60x46mm, 30mm deep. Standby loss only 0.6 watts. This repeater is only required if the structural conditions prevent undisturbed reception or the distance between the wireless pushbutton and the receiver is too great. The 1-level mode is activated ex works. Only the signals from sensors and actuators are received, checked and sent on with full transmission power. Radio signals from other repeaters are ignored to reduce the amount of data. By removing the cover (to do this, loosen the two screws on the front) and repositioning the jumper right-aligned, you switch to 2-level mode. Now the radio signals of another 1-level repeater are also processed. A signal can thus be received and amplified a maximum of 2 times. A red LED indicates all received radio signals by flashing briefly. Radio repeaters do not have to be taught in. They receive and amplify the signals from all wireless sensors in their reception area. There is an M12 screw connection on the underside for the watertight mains connection. The permissible ambient temperature -20 degrees C to +55 degrees C. Mounting by screwing.