Switch actuator heating cooling relay 4 channels - Heating actuator for home automation F4HK14

F4HK14 30014010 4010312314982 EAN/GTIN DE 30298319 WEEE

Our best price
£41.79 incl. VAT (£0.00)
£55.94 (-25.29% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Switch actuator heating cooling relay 4 channels F4HK14 radio bus system, other bus systems... more
Switch actuator heating cooling relay 4 channels - Heating actuator for home automation F4HK14 – Eltako – 30014010 – 4010312314982: Switch actuator heating cooling relay 4 channels F4HK14 radio bus system, other bus systems without, radio bidirectional, REG mounting type, width in modular units 1, with bus coupling, removable bus module, control variable constant, control variable switching, manual switching, number of binary inputs 0, max. switching current (resistive load) 4A, number of outputs 4, max. output current 4A, switching voltage 230 ... 230V, degree of protection (IP) IP20, heating/cooling relay with 4 channels, 1 NO contact each 4A/250V AC, isolated from the supply voltage, with DX Technology. Bidirectional. Standby loss only 0.1 watts. Connection to the Eltako RS485 bus. Bus cross-wiring and power supply with jumper. To do this, simply connect the N conductor to the terminal (N) and L to K(L). This results in an additional standby loss of only 0.1 watts. If all 4 relays are switched on, 0.7 watts are required. If the supply voltage fails, the system is switched off in a defined manner. This heating/cooling relay evaluates the information from wireless temperature controllers or sensors. Possibly supplemented by window-door contacts, motion detectors, window handle sensors FFG7B-rw and wireless pushbuttons. As an alternative to a wireless temperature controller, the temperature information about target and actual values can also be obtained from the GFVS software. There is also the option of specifying the target temperature via the GFVS software and thus limiting the setting range of the wireless temperature controller. Upper rotary switch for the adjustable hysteresis: left stop: smallest hysteresis 0.5 degrees. Center position: hysteresis 2.5 degrees. Right stop: largest hysteresis 4.5 degrees. In between, subdivision in 0.5 degree increments. Center rotary switch for the control modes. The LED under the upper rotary switch accompanies the teach-in process according to the operating instructions and indicates control commands during operation by flashing briefly.
... more
Bus system KNX no
Bus system KNX radio no
Bus system radio bus yes
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional yes
Mounting REG
Width in division units 1
With bus coupling yes
Bus module removable yes
Control variable steady yes
Switching manipulated variable yes
Valve protection function no
Manual gearshift yes
Max. Switching current (resistive load) 4 A
Number of exits 4
Max. Output current 4 A
Switching voltage 230V
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Switch actuator heating cooling relay 4 channels - Heating actuator for home automation F4HK14"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.