Ceiling presence detector KNX 360 degrees RW approx. 8m flush-mounted - KNX movement sensor PD 36...

PD 360/8 KNX Basic EB10430442 4015120430442 EAN/GTIN DE 36503340 WEEE

Our best price
£58.76 incl. VAT (£0.00)
£94.55 (-37.85% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Ceiling presence detector KNX 360 degrees RW ca.8m UP PD 360/8 KNX BASIC bus system KNX, other... more
Ceiling presence detector KNX 360 degrees RW approx. 8m flush-mounted - KNX movement sensor PD 36... – ESYLUX – EB10430442 – 4015120430442: Ceiling presence detector KNX 360 degrees RW ca.8m UP PD 360/8 KNX BASIC bus system KNX, other bus systems without, version presence detector, mounting type surface-mounted, material plastic, material quality thermoplastic, surface untreated, design of the surface matt, color white, RAL number ( similar) 9010, with bus coupling, response brightness adjustable, teach function for response brightness, optimal installation height 3m, max. range to one side 4m, max horizontal 180 ... 360°, number of channels 1, number of binary inputs 0, switching capacity 0W, min. duty cycle 30s, max. duty cycle 720min, KNX ceiling presence detector with 360° detection range. Reach of up to 8 m in diameter with a recommended mounting height of 3 m for comfort applications. Can be used in the bus system KNX (EIB), TP (2-wire bus) in connection with other KNX components. Parameter and function setting via ETS (Engineering Tool Software). Communication objects (complete list of communication objects on - Light value output (2 bytes). - Status message. - Usable as master or slave. - KNX button control for light channels. - Fully or semi-automatic. - Trial operation. . Standard version as a flush-mounted device. Surface mounting possible. Targeted blanking of areas using the enclosed lens mask.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
Execution Presence detector
Mounting Flush
Material Plastic
Material quality Thermoplastic
Surface protection untreated
Execution of the surface frosted
Colour white
RAL number (similar) 9010
Transparent no
With bus coupling yes
Extension input no
Undercrawl / Rearfield no
Mode switch no
Animal zone no
Staircase monitoring no
Adjustable response brightness yes
Teach function for response brightness yes
Off-delay self-learning no
DALI-2 certified no
Optimum mounting height 3 m
Max. Range to one page 4 m
Max. Range frontal 3 m
Detection field diameter on floor 8 m
Vertical detection angle 53..106 °
Detection angle horizontal 180..360 °
Amount of channels 1
Switching capacity 0 W
Minimum duty cycle 30 s
Max. Duty cycle 720 min

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Ceiling presence detector KNX 360 degrees RW approx. 8m flush-mounted - KNX movement sensor PD 36..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.