DALI wall panel RGB+W 100-240V/AC - Controller for luminaires DALWPRGBW

DALWPRGBW 4037293014700 EAN/GTIN DE 63351424 WEEE

Our best price
£115.48 incl. VAT (£0.00)
£185.06 (-37.6% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
DALI wall panel RGB+W 100-240V/AC DALWPRGBW Dynamic design, type of control DALI, number of color... more
DALI wall panel RGB+W 100-240V/AC - Controller for luminaires DALWPRGBW – EVN – 4037293014700: DALI wall panel RGB+W 100-240V/AC DALWPRGBW Dynamic design, type of control DALI, number of color channels 4, programmable, housing plastic housing, built-in, output voltage 0V, input voltage 100 ... 240V, max. output current 0A, protection class (IP ) IP20, protection class II, length 86mm, width 86mm, height 45mm, diameter 0mm, up to four channels can be controlled with the DALI wall panel. Since it is an RGBW wall panel, four DALI addresses are required for each channel. The different colors can be set using the touch wheel, but the colors red, green, blue and white can also be switched on and off individually. In addition to the ten saved color change programs, it is possible to save up to four light scenes per channel. Of course, dimming with the panel is also possible. Since the wall panel acts as a BUS transmitter, the use of the DALI base station is optional, but not absolutely necessary. When operated as a BUS transmitter (without DALI base station), the connection is made to 230V, whereby a maximum of 50 participants can be controlled via a wall panel. In addition, 3 additional wall panels can be integrated into the system, which are operated via the BUS voltage of the first wall panel (BUS encoder). When operating with the DALI base station, a maximum of 4 wall panels can be used per base station. The wall panels must not be operated with 230V, but only with the BUS voltage of the DALI base station. In addition, there is the possibility of operating two wall panels via 230V in one system, with only one of the wall panels acting as a BUS encoder. This allows up to 100 participants (50 per panel) to be controlled. Two additional wall panels can be integrated into this system via the BUS voltage, whereby the controllable number of participants remains unchanged. It can be mounted on switch boxes without any problems. Please note: The panel sends a broadcast command that switches all components within a BUS system to linear dimming. This function cannot be switched off.
... more
Execution dynamic
Suitable for outdoor use no
Type of control DALI
Number of color channels 4
Programmable yes
Casing Plastic housing
Construction no
Installation yes
DIN rail mounting no
Output voltage 0 V
Input voltage 100..240 V
Max. Output current 0A
IP protection) IP20
Protection class II
Length 86 mm
Width 86 mm
Height 45 mm
Diameter 0 mm
Compatible with Apple HomeKit no
Compatible with Google Assistant no
Compatible with Amazon Alexa no
IFTTT support available no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "DALI wall panel RGB+W 100-240V/AC - Controller for luminaires DALWPRGBW"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.