Motion detector flush-mounted inside 1S/24VAC/DC - Movement sensor 360° 8m 18.31.0.024.0300

Motion detector flush-mounted inside 1S/24VAC/DC - Movement sensor 360° 8m 18.31.0.024.0300 – Finder – 8012823348285: Motion detector Flush-Inside 1S/24VAC/DC 18.31.0.024.0300 Motion detector version, sensor type passive infrared, creep-under protection/rear field monitoring, scanning angle 360°, optimum installation height 2.8m, stairwell monitoring, max. range to one side 4m, max. range in front 8m , detection field diameter on floor 8m, response sensitivity adjustable, response brightness adjustable, with signal unit, suitable for ceiling mounting, flush-mounted installation type, connection type screw terminal, plastic material, thermoplastic material quality, halogen-free, surface untreated, surface finish matt, color white, RAL number (similar to ) 9010, degree of protection (IP) IP40, type of voltage AC/DC, frequency 50 ... 60Hz, nominal voltage 24V, min. duty cycle 10s, max. duty cycle 12min, horizontal detection angle 360 ... 360°, response brightness 5 ... 350lx, Max. switching capacity 1000W, suitable for C-load, temperature -10 ... 50°C, number of switching zones 1, max. inrush current 100A, control current 11mA, low e 40.9mm, diameter 80mm, installation depth 36.5mm, installation diameter 63mm, motion detector for 24 V AC/DC, for suspended interior ceilings, 1 potential-free closer 10 A 230 V AC (AC1), contact material AgSnO², max. inrush current 100 A - 5 ms, max. switching capacities at 230 V AC: AC1-2,300 VA, AC15-450 VA, lamp loads: incandescent and halogen lamps 1000 W, energy-saving lamps 300 W, LED (230 V AC) 300 W, LV halogen lamps or LED with 300 W electronic ballast, low-voltage halogen lamps or LEDs with 500 W conventional ballast, fluorescent lamps with 500 W electronic ballast, fluorescent lamps with 350 W conventional electronic ballast, with light sensor 5 - 350 lux adjustable to day or night function and fleeting switch-on function 10 s to 12 min