KNX analogue actuator 4-fold for the conversion of KNX telegrams to analogue signals 102200

102200 4010337010708 EAN/GTIN DE 59229780 WEEE

Our best price
£205.63 incl. VAT (£0.00)
£375.21 (-45.2% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Analog actuator 4f. 102200 bus system KNX, bus system LON, other bus systems without, mounting... more
KNX analogue actuator 4-fold for the conversion of KNX telegrams to analogue signals 102200 – Gira – 4010337010708: Analog actuator 4f. 102200 bus system KNX, bus system LON, other bus systems without, mounting type REG, width in modular units 4, basic module design, with bus coupling, number of outputs 4, output current 0 ... 2mA, output voltage 24 ... 24V, protection class (IP) IP20, KNX analog actuator 4-fold REG plus features: Analog actuator 4-fold REG with integrated bus coupling converts KNX telegrams (1-byte and 2-byte) into analogue output signals. These analog output signals enable actuators in heating, air conditioning and ventilation technology to adapt their output variables based on bus information and to take part in control processes. Voltage outputs with short-circuit monitoring. The output status is indicated by the status LED. The output variables can be forced. Outputs that are not required can be switched off. The four outputs are parameterized by the software for voltage or current signals.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON yes
Bus system Powernet no
Other bus systems without
Mounting REG
Width in division units 4
Execution Base module
With LED display no
With bus coupling yes
Number of exits 4
Output current 0..2 mA
Output voltage 24V
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX analogue actuator 4-fold for the conversion of KNX telegrams to analogue signals 102200"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.