Button rocker KNX, 1f, stainless steel - KNX Bus coupler for bus system 5172600

Gira - 5172600 - Button rocker KNX, 1f, stainless steel - KNX Bus coupler for bus system 5172600
Photo source: fig. possibly similar
Photo source: fig. possibly similar
5172600 4010337090670 EAN/GTIN DE 59229780 WEEE

£61.08 incl. VAT (£0.00)
£94.84 (-35.6% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Rocker button KNX, 1f, stainless steel 5172600 KNX bus system, other bus systems without,... more
Button rocker KNX, 1f, stainless steel - KNX Bus coupler for bus system 5172600 – Gira – 4010337090670: Rocker button KNX, 1f, stainless steel 5172600 KNX bus system, other bus systems without, flush-mounted mounting type, claw/screw mounting type, KNX button, rocker 1-gang with arrow symbols stainless steel Features: KNX button with integrated bus coupler. Integrated temperature sensor. Rocker or button function adjustable for each control surface. Control of up to four functions possible via the button function of the KNX button. Functions: switching, dimming, blinds, value transmitter, scene extension, 2-channel operation and controller extension. Switching: The command when pressing and/or releasing is adjustable (no reaction, switching on, switching off, switching). Dimming: The command when pressed, the time between switching and dimming, dimming in different stages, the telegram repetition after a long press and the sending of a stop telegram at the end of the press can be adjusted. Blind: The command when pressed and the operating concept can be adjusted. The operating concept can be adjusted for short and long actuation and slat adjustment times. Temperature measurement: Room temperature measurements by internal sensor, internal and wired remote sensor or internal and external sensor. Value transmitter: The functionality (1 byte and 2 byte value transmitter) and the value can be set. Scene extension: The functionality (without or with memory function) and the scene number can be set. 2-channel operation: By pressing a button, up to two telegrams can be sent to the KNX. The operating concept can be adjusted and the time for short and long operation can be adjusted. The functionality of the channels can be set separately from each other. Locking function for locking individual buttons or rockers. Functions of the status LED: Each status LED can be parameterized independently of the control surface. LED orientation lighting: For orientation, all LEDs can be permanently switched off or on, display the status of a separate communication object (ON, OFF, flashing) or switched on when any button is pressed and automatically switched off again after a delay time has elapsed. Status LED functions: always OFF, always ON, actuation display, telegram acknowledgment, status display, control via separate LED object, operating mode display, controller status display, presence status display and setpoint shift display. Color can be parameterized. The color selection is done either together for all status LEDs or separately for each status LED of the device. The status LEDs can either light up red, green or blue. The brightness of the status LED can be adjusted in five levels. With night reduction, the brightness of the status LED can be reduced at night via a communication object. In addition, a superimposed function can be enabled for each status LED, allowing a different color and display type to be set. Controller extension properties: External room temperature controllers can be controlled using the controller extension push-button function. Operating mode switching, forced operating mode, presence function and setpoint shift. Evaluation of the controller status via the status LED. Measuring the room temperature with an internal sensor or optionally by generating a measured value of the internally measured temperature with an external temperature. Notes: KNX Data Secure compatible. Firmware updates are possible with the Gira ETS service app (additional software). When using Gira TX_44, use IP20 adapter frame and cover from System 55. Illuminated in accordance with the Workplace Ordinance (ArbStättV). Further printing variants for the KNX button are available via the Gira labeling service.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
With bus coupling yes
Material Plastic
Material quality Thermoplastic
Surface protection other
Colour Stainless steel
Transparent no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Button rocker KNX, 1f, stainless steel - KNX Bus coupler for bus system 5172600"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.