KNX continuous regulator, pure white glossy 210003

KNX continuous regulator, pure white glossy 210003 – Gira – 4010337048039: Continuous controller rws-gl KNX/EIB 210003 bus system KNX, other bus systems without, composition other, type of installation flush-mounted, with on-site operation, with theft/dismantling protection, number of binary inputs 1, material other, material quality other, surface other, design of Surface not applicable, color white, RAL number (similar) 9010, manual setpoint adjustment, degree of protection (IP) IP20, with bus coupling, KNX continuous controller with button interface 4-fold system 55 pure white glossy The flush-mounted continuous controller and the object controller combine the functions of a KNX bus coupler, one individual room temperature controller with setpoint specification and that of a binary input. Features: Four potential-free contacts can be connected to the binary input. Input 1 can be used to connect a remote sensor to measure the temperature in the floor. Two inputs can be configured as outputs (max. 0.8 mA). The controller function is used for individual room temperature control. The controller records the current room temperature with an internal or external temperature sensor and processes this with an adjustable temperature setpoint to create a manipulated variable. It can be used to control actuators with a continuous control signal as well as with a switching control signal. Controller: 5 operating modes: comfort, stand-by, night, frost or heat protection and controller lock (e.g. dew point operation). Heating and cooling functions: heating, cooling, heating and cooling, basic and additional heating, basic and additional cooling. Preset control parameters for common heating and cooling elements. Controller can be switched off (dew point operation) or controller or operation of the controller can be locked. Valve protection function (valve is opened cyclically every 24 hours). Types of control: continuous PI control, switching PI control (PWM) and switching 2-point control (on off). Temperature recording via an internal and/or external sensor (averaging for large rooms). Inputs: Free assignment of the switching, dimming, blinds and value transmitter functions to the inputs. Blocking object for blocking individual inputs. Behavior on bus voltage recovery can be configured separately for each input. Telegram Rate Limit. Switching function: two independent switching objects are available for each input and can be activated individually, command can be set independently for a rising and falling edge (ON, OFF, TOGGLE, no reaction). Dimming function: One-surface and two-surface operation, time between dimming and switching and dimming increment adjustable, telegram repetition and stop telegram possible. Blind function: Command can be set with a rising edge (no function, UP, DOWN, TOGGLE), parameterizable operating concept (Step - Move - Step or Move - Step), time between short and long-term operation can be set, slat adjustment time can be set. Value transmitter and light scene extension function: Flank (button as NO contact, button as NC contact, switch) and value can be configured for a flank, value adjustment for the button via a long button press for value transmitter possible, light scene extension with or without memory function. Temperature sensor function: One channel of the button interface can be used as an external temperature sensor for the room temperature controller. Outputs: Independent switching of max. two outputs. The temperature setpoint is shifted with the adjusting wheel. A presence button is used to switch between comfort and stand-by mode. The current states are displayed on the continuous controller by LEDs. Notes : A separate bus coupler is not required. When connecting the external inputs, the use of a switch terminal box is recommended.