KNX guard pure white - KNX Movement sensor for home automation 219402

Gira - 219402 - KNX guard pure white - KNX Movement sensor for home automation 219402
Photo source: fig. possibly similar
Photo source: fig. possibly similar
219402 4010337056386 EAN/GTIN DE 59229780 WEEE

Our best price
£178.35 incl. VAT (£0.00)
£279.35 (-36.16% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
KNX guardian pure white 219402 KNX bus system, other bus systems without, motion detector... more
KNX guard pure white - KNX Movement sensor for home automation 219402 – Gira – 4010337056386: KNX guardian pure white 219402 KNX bus system, other bus systems without, motion detector version, surface-mounted type of installation, other material, other material quality, other surface, surface design not applicable, color white, max. range to one side 16m, max. range to the front 16m, Vertical detection angle 0 ... 240°, horizontal detection angle 0 ... 240°, KNX motion detector Cube 240 pure white glossy Features: The PIR motion detector consists of three passive infrared (PIR) motion detectors with an integrated brightness sensor, an integrated IR receiver and an integrated red light-emitting diode (LED) to display a detected movement in test mode. Two independent light outputs. Light output: switching, dimming value transmitter or light scene extension configurable. Operating mode fully automatic (automatic on or off) or semi-automatic (manual on, automatic off). Overrun time adjustable or dynamic overrun time can be activated. Day/night switching. spear object. Automatic temperature-compensated sensor sensitivity. Sensor sensitivity configurable. Send brightness values cyclically or when there is a change. Brightness-independent presence output. A switch-on delay and a follow-up time can be configured. It is possible to send the current status cyclically depending on the status. Brightness-independent absence exit. A switch-on delay and a follow-up time can be configured. In this case, the run-on time expires as soon as someone enters the detection area. It is possible to send the current status cyclically depending on the status. Manual operation via IR remote control. Notes : Suitable for indoor and outdoor ceiling and wall mounting. Optional: remote control via IR remote control KNX.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
Execution Motion detector
Mounting Wall-mounted
Material other
Material quality other
Surface protection other
Execution of the surface glittering
Colour white
Transparent no
With bus coupling no
Max. Range to one page 16 m
Max. Range frontal 16 m
Vertical detection angle 0..240 °
Detection angle horizontal 0..240 °

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX guard pure white - KNX Movement sensor for home automation 219402"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.