KNX presence detector comfort, pure white 210602

KNX presence detector comfort, pure white 210602 – Gira – 4010337084594: Presence detector comfort KNX rws 210602 bus system KNX, bus system radio bus, other bus systems without, design presence detector, mounting type surface-mounted, material other, material quality other, surface other, design of the surface not applicable, color white, RAL number (similar) 9010, with bus coupling, Extension input, creep-under protection/rear field monitoring, stairwell monitoring, response brightness adjustable, teach function for response brightness, self-learning switch-off delay, optimum installation height 3m, detection field diameter on the floor 20m, vertical detection angle 360 ... 360°, KNX presence detector comfort pure white presence detector for presence monitoring (operating mode: presence detector ), for motion detection (operating mode: ceiling detector) or for monitoring by message telegrams (operating mode: detector) indoors. Features: flush-mounted device with integrated KNX bus coupling. Programming LED button visibly operable after removing the decorative ring when installed. PIR sensors: three sensors (crossed beam paths), integrated brightness sensor. Adjuster for manually correcting the sensitivity. Sensitivity configurable. Sensitivity adjuster on the device can be deactivated via software. Display of motion detection (permanent or only in the walk test). Separate evaluation in the far range of the three PIR sensors, each with a 120 detection field with overlapping. Manual operation via IR remote control. A maximum of 5+2 function blocks can be configured. Function blocks 1 to 5 each with an adjustable function: ceiling monitor, presence detector, signaling operation. Function block 6: Presence detector with light control. Function block 7: Brightness sensor with limit value monitoring. Function block switchover e.g. B. for day and night operation or week and weekend operation. Function blocks 1 to 5: individual device, main unit, extension can be set. Adjustable operating mode with a single device as the main unit: automatic, semi-automatic (manual ON automatic OFF or automatic ON manual OFF). Two outputs per function block (1 to 5) for ceiling monitor, presence detector function. Functions ceiling monitor, presence detector per output: switching, staircase function, switching with forced position, dimming value transmitter, light scene extension unit, temperature value transmitter, brightness value transmitter, temperature operating mode. Ceiling monitor, presence detector: Adjustable twilight level, twilight level via external communication object or via teach-in, additional transmission delay via external communication object, adaptive run-on time (self-learning additional transmission delay), short-term presence function, twilight level feedback, blocking function, manual operation via push button sensor (separate communication object), Switch-off brightness (for presence detectors) via teach-in, measurement of the time span after the last movement. Presence detector function with light control: Combination with presence detector function block or individual device, adjustable setpoint, setpoint specification via external communication object, setpoint shift via external communication object, teach-in function, feedback of the effective setpoint. Brightness sensor function with limit value monitoring: up to three limit values can be configured, functions switching, dimming value transmitter, light scene extension unit, hysteresis can be configured, limit value via external communication object or teach-in, blocking function. Notes: The presence detector is not suitable for alarm messages in VdS-compliant alarm systems. Ceiling mounting on fixed ceilings in device box or surface-mounted housing.