Ventilation unit E with interior wall panel - Peripheral supply and exhaust device DL 50 WE2

Ventilation unit E with interior wall panel - Peripheral supply and exhaust device DL 50 WE2 – Glen Dimplex – 372720 – 4015627372726: Ventilation unit E with inner wall panel DL 50 WE2, energy efficiency class = B, energy efficiency class spectrum = A + to G, type of ventilation = decentralized supply and exhaust air, heat recovery via = cross counterflow, heat source = exhaust air, nominal power = 23 W, degree of heat provision = 83%, Nominal current = 0.2 A, with hot water preparation = no, with heating = no, integration solar = no, with remote control = no, heating output heat pump = 0 kW, additional electrical heating = 0 kW, air connection diameter = 0 mm, height = 340 mm, width = 340 mm, depth = 320 mm, weight = 5.1 kg, volume flow = 50 m³ / h, with water air heater = no, with additional heating = no, decentralized living room ventilation unit with heat recovery for controlled ventilation of individual rooms. The ventilation unit is particularly suitable for retrofitting and renovation. Installation takes place directly into an outer wall without air ducts. The device is equipped with very efficient and extremely quiet running EC fans. Used and damp indoor air is discharged to the outside. Fresh air is supplied to the room. A cross-counterflow heat exchanger (for cleaning on the room side) recovers the heat contained in the exhaust air in order to heat the outside air. The anti-icing function with automatic defrosting prevents the heat exchanger from freezing at low outside temperatures. The condensate is drained via the outer wall panel and is equipped with a temperature-controlled trace heating. The control element with a segment display for operating mode, filter signal and error message as well as supply air and extract air filters is integrated in the plastic inner wall panel (alpine white, which can be painted over by the customer). Optionally, a radio remote control and / or an air quality sensor can be retrofitted for needs-based control. A wall sleeve (round or square version) and the outer wall panel are necessary for the installation.