KNX analogue input 4-ch TYF784

TYF784 3250616059986 EAN/GTIN DE 23692311 WEEE

Our best price
£177.46 incl. VAT (£0.00)
£329.23 (-46.1% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Analog input 4-fold TYF784 bus system KNX, other bus systems tebis TX, mounting type REG, width... more
KNX analogue input 4-ch TYF784 – Hager – 3250616059986: Analog input 4-fold TYF784 bus system KNX, other bus systems tebis TX, mounting type REG, width in modular units 4, basic module design, with LED display, number of inputs 4, with bus coupling, input variable voltage, input variable current, protection class (IP) IP20, analog input 4-way REG KNX. Analog input for recording and processing independent analog sensor signals depending on the input signal, limit value messages can be transmitted via the bus. Used to connect four analogue sensors with output signals 0 to 1 V DC, 0 to 10 V DC, 0 to 20 mA DC, 4 to 20 mA DC. The 4-20 mA current inputs are monitored for wire breaks. An expandable with an expansion module TYF784E with system interface for analog input module is possible for another 4 analog inputs. The device has a programming button with a red LED. The two statuses are displayed via a green/red LED (operation/error). Connection of wind, rain, brightness, temperature, twilight, humidity and temperature sensors. For active sensors, the connection is made using screw terminals. The measured values are output as 16-bit values or as 8-bit values. The measured values for value changes and/or cyclically are displayed. Two limit values with definable hysteresis curves are available for the analogue sensors. Limit values as 8-bit values or as 16-bit values from the outside must be specified.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems tebis TX
Mounting REG
Width in division units 4
Execution Base module
With LED display yes
Number of inputs 4
With bus coupling yes
Input voltage yes
Input size of electricity yes
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX analogue input 4-ch TYF784"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.