KNX binary input 2-fold TXB302

TXB302 3250616049420 EAN/GTIN DE 23692311 WEEE

Our best price
£35.67 incl. VAT (£0.00)
£66.19 (-46.11% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Binary input KNX, 2-fold, UP TXB302 bus system KNX, other bus systems without, type of... more
KNX binary input 2-fold TXB302 – Hager – 3250616049420: Binary input KNX, 2-fold, UP TXB302 bus system KNX, other bus systems without, type of installation flush-mounted, width in modular units 0, with bus coupling, number of inputs 2, input voltage 5... 5V, type of input voltage DC, degree of protection (IP) IP30, min. Depth of the device box 40mm, binary input KNX TP 2-fold, UP. 2 binary inputs UP (button interface) for connecting standard buttons, switches or potential-free contacts. The binary input provides the query voltage. The device converts the switching information into commands on the KNX bus. The binary input is flush-mounted in a 60 mm device box. Functions of the application software: - Switch ON/OFF (send also with a time delay and periodic sending) - Dimming (1 and 2 button dimming) - UP/DOWN (1 and 2 button operation, also travel as long as pressed) - Value transmitter for Temperature, brightness, dimming value in %, value - Alarm input with periodic transmission and edge selection - Two-channel mode per input for switching and value call functions: Function 1 via short button press, function 2 via long button press - Setpoint selection for heating function - Blocking function - Forced control - Timer call - scene recall with button (1 scene) or switch (2 scenes) - behavior on initialization and bus voltage return can be defined
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
Mounting Flush
With bus coupling yes
Bus module removable no
Activate LED no
With LED display no
Number of inputs 2
Input voltage 5 V
Type of input voltage DC
External query voltage necessary no
IP protection) IP30
Min. depth of the device socket 40 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX binary input 2-fold TXB302"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.