Meter connection column 1 meter space, 3.HZ - Equipped meter cabinet IP44 1710x583mm ZAS175BD15

Meter connection column 1 meter space, 3.HZ - Equipped meter cabinet IP44 1710x583mm ZAS175BD15 – Hager – 3250611073215: Meter connection pillar 1 meter space, 3.HZ ZAS175BD15 1-storey design, number of meter spaces 1, number of TSG spaces 0, lower connection space with 5-pole busbar, type of mounting surface-mounted/partially recessed, material plastic, number of distributor rows 5, number of fields 2 , degree of protection (IP) IP44, width 583mm, height 1710mm, depth 277mm, installation width 583mm, installation height 1710mm, installation depth 277mm, meter connection column 175, universZ, 1 meter space, 3-point, 5-pin, base. Meter connection column, protection class IP 44, as a base column including burial base, made of glass fiber reinforced polyester FS 833.5 according to DIN EN 14598 with recyclate. Meter connection column corresponds to the current technical application rule VDE-AR-N 4100:2019-04. With additional components, the base pillar is expanded into a ready-to-connect meter connection pillar for the relevant DNO. Profiled housing in rib design. Door with an opening angle of 180 degrees with free standing and 90 degrees with bayed housings. Doors can be detached, doors can be hinged on the left or right. Closure with swivel lever and three-point bascule lock with 1 or 2 profile half cylinders. Built-in cylinder below with keyed alike series. A second locking cylinder (e.g. from the VNB locking system) can be installed at the top after removing the square lock. If no second profile half cylinder is installed, the second upper opening must be equipped with a blanking plug. Ventilation takes place via labyrinth-like ventilation channels, prevents the ingress of foreign bodies and is poke-proof. Meter connection pillars are built according to technical guidelines: connection cabinets outdoors/connection of stationary switching and control cabinets and meter connection pillars to the low-voltage network of the DSO. The installation consists of counter fields with protective insulation DIN 43870 (functional surfaces) for counters. Meter spaces are prepared for an IP54 cover. Burial base and meter connection column form a unit. A floor grid is recommended. To avoid condensation, the base is to be filled with base filler up to the level of the cable fastening rail.