Heating actuator 6-fold KNX easy f. 24/230V - KNX Heating actuator for home automation TXM646T

TXM646T 3250618502015 EAN/GTIN DE 23692311 WEEE

Our best price
£101.60 incl. VAT (£0.00)
£149.85 (-32.2% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Heating actuator 6-fold KNX easy f. 24/230V TXM646T bus system KNX, other bus systems without,... more
Heating actuator 6-fold KNX easy f. 24/230V - KNX Heating actuator for home automation TXM646T – Hager – 3250618502015: Heating actuator 6-fold KNX easy f. 24/230V TXM646T bus system KNX, other bus systems without, mounting type REG, width in modular units 4, with bus coupling, control variable constant, control variable switching, valve protection function, manual switching, number of binary inputs 0, max. switching current (resistive load ) 0.16A, number of outputs 6, max. output current 0.16A, switching voltage 24 ... 230V, degree of protection (IP) IP20, heating actuator 6-fold KNX easy for 24/230V actuators, triac. Heating actuator (REG) with 6 electronic outputs (Triac) for noiseless activation of electrothermal actuators for heating systems or chilled ceilings. Consisting of modular installation device with integrated bus coupler, bus connection via KNX connection terminal, slide switch auto/manual, 6 manual buttons for open/close per actuator channel with status LED (default, short circuit, overload), programming button with integrated LED, labeling field and screw terminals for input and output voltages. Functions: Output voltage for compatible valves 230 V AC or 24 V AC, manual operation via slide switch of the channel with 0% - 50% - 100%, summer/winter mode, set values for normal forced or emergency mode. Cyclic monitoring/detection of the input signals from thermostats (monitoring time approx. 45 min). If the thermostat is defective, the triac output is set to emergency operation. Note: The device can be programmed using the easy commissioning tool, easy configuration server or the ETS (from version 5). Actuators with the same operating voltage must be connected to all actuator channels. Observe installation instructions for heating system/actuator manufacturers.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
Mounting REG
Width in division units 4
With bus coupling yes
Bus module removable no
Control variable steady yes
Switching manipulated variable yes
Valve protection function yes
Manual gearshift yes
Max. Switching current (resistive load) 0.16 A
Number of exits 6
Max. Output current 0.16 A
Switching voltage 24..230 V
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Heating actuator 6-fold KNX easy f. 24/230V - KNX Heating actuator for home automation TXM646T"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.