KNX switching actuator 2-fold or blind/shutter actuator 1-fold TXB602F

KNX switching actuator 2-fold or blind/shutter actuator 1-fold TXB602F – Hager – 3250616048898: Switching/blind output easy,2/1f, UP, 6A TXB602F bus system KNX, other bus systems without, mounting type flush-mounted, width in modular units 0, on-site/manual operation, with LED display, number of binary inputs 0, max. switching capacity 1200W , Output power 500W, Max. number of switching outputs 2, Max. switching current 6A, Rated current 6A, Rated operating voltage 230 ... 230V, With bus coupling, Min. compartment KNX easy, 6A, UP. Flush-mounted switch/blind actuator with potential-free make contacts for switching independent loads or for controlling a motor drive. With integrated bus coupler, KNX bus connection via pre-assembled cable, load screw terminals. LED button for manual operation or as a programming button. Functions: ON/OFF, timer function with switch-off early warning, priority control with status display, automatic function can be activated/deactivated, load shedding by channel deactivation, 64 scene functions. Roller shutter/blind function: up/down operation with slat angle adjustment, positioning function and slat adjustment for blinds in percent parameterization. Status objects for the position of the slats in percent and the upper/lower end position. Forced control with status display and 3 alarm objects with different priority control. Automatic function can be activated/deactivated, 64 scene functions per channel and adjustable sun protection function. Note: The device can be programmed using the easy commissioning tool, easy configuration server or the ETS (from version 4). Observe the instructions of the roller shutter/blind motor manufacturer.