Converter system 100A TAB Bayernwerk - Meter panel 1 kWh-meters 1 rows UF32W6N3P

Hager - UF32W6N3P - Converter system 100A TAB Bayernwerk - Meter panel 1 kWh-meters 1 rows UF32W6N3P
Photo source: fig. possibly similar
Photo source: fig. possibly similar
UF32W6N3P 3250611031550 EAN/GTIN DE 23692311 WEEE

Our best price
£1,906.64 incl. VAT (£0.00)
£3,432.71 (-44.46% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Transformer system 100A TAB Bayernwerk UF32W6N3P Design 1-storey, number of meter spaces 1,... more
Converter system 100A TAB Bayernwerk - Meter panel 1 kWh-meters 1 rows UF32W6N3P – Hager – 3250611031550: Transformer system 100A TAB Bayernwerk UF32W6N3P Design 1-storey, number of meter spaces 1, number of TSG spaces 0, main switch rated current 100A, number of distributor rows 1, width 500mm, height 1050mm, width in modular units 12, connection space 300mm, color white, RAL -Number 9010, degree of protection (IP) IP30, complete converter panel, universN, 3-point measurement, with test terminals, Bayernwerk. 0x complete converter panel up to 100 A Factory pre-assembled and wired complete converter panel, can be combined with other complete panels and meter cabinets, with standard sealable contact protection covers, reinforced using internal gas pressure processes, each with four quick-release bolts. VDE symbol approval according to DIN EN 61 439 -1 and - 2 and -3 (VDE 0660 Part 600 -1 and -2 and -3), dimensional standard: DIN 43 870, for installation in distribution cabinets 1100 mm high, min. 2 fields, incl. feed terminals up to max. 50 mm², prepared for receiving an overvoltage protection device for busbar mounting (not included), protection class: with the cabinet door open IP3x for installation in univers distribution cabinets 1100 mm high, at least 2 fields, at least 205 mm deep, including feed terminals up to a maximum of 50 mm², supply line from below and outlet line upwards for direct connection, equipped with: 1 busbar 250 A, 5-pole, 2-field 1 NH00 bus-mounting fuse base, 3-pole 1 piece of preparation for receiving an overvoltage protection device for busbar assembly (not included) 1 piece of load switch 125 A, 3-pole 1 piece of N and PE terminal up to 70 mm² 1 piece of measuring transformer space for accommodating the 3 VNB converters 3 piece of miniature circuit breakers, 1-pole , 10 A B characteristic, 25 kA 1 piece 3-point Meter space to accommodate the VNB converter meter 1 piece wiring of the converters and test terminals 1 piece test terminal according to TAB (Bayernwerk and equivalent)
... more
With wiring yes
Execution 1 floor
Number of meter slots 1
Lower connection space with bus bar 5-pin
Main switch rated current 100 A
Number of distribution rows 1
Width 500 mm
Height 1050 mm
Width in division units 12
Connection space 500 mm
With mounting plate no
Colour white
RAL-number 9010
IP protection) IP30

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Converter system 100A TAB Bayernwerk - Meter panel 1 kWh-meters 1 rows UF32W6N3P"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.