Wireless smoke alarm set Q, 3xTG550A, white - Optic fire detector TG553A

Wireless smoke alarm set Q, 3xTG550A, white - Optic fire detector TG553A – Hager – 3599430009693: Wireless smoke alarm set Q, 3xTG550A, white TG553A Optical principle of operation, Response temperature -10°C, Can be networked via radio (standard), Max. number can be networked 40, Primary power supply battery/accumulator, Supply voltage 6 ... 6V, Voltage type of the supply voltage DC, Backup included -Battery without, volume 85dB(A), mounting type other, with base, length 116mm, width 116mm, height 49mm, diameter 116mm, color white, RAL number (similar) 9010, type of test/pause button combination, cable entry not applicable , Degree of protection (IP) IP32, with Q label, wireless smoke alarm set comfort Q, 3x TG550A, IR alarm stop, white. Wireless smoke alarm package consisting of 3 pieces TG550A with small size and attractive design language according to DIN EN 14604 with additional certification according to the increased test requirements of the Q certification based on the vfdb guidelines 14-01? Association for the Promotion of German Fire Protection? (vfdb). Increased test criteria against the ingress of foreign bodies and increased protection against damp heat, oxidation and EMC, as well as better thermal cycling. Used for the early detection and signaling of fires with smoke development in the interior of apartments or areas similar to apartments, as well as mobile homes, caravans and caravans. Installation as a single device or as a wireless network with up to a maximum of 40 detectors possible with additional activation of any detector in the wireless network as a repeater to increase the range. Wireless networking can be carried out without tools using push-button mode and can be checked using the integrated LED range display. Patented alarm stop by any manufacturer-independent IR remote control, by pressing the alarm button or optionally by wireless networking with a wireless push button TG558B alarm stop. Manual alarm triggering is optionally possible by integrating a TG558A wireless push button for the house alarm. Optional control of external signal or peripheral devices possible using relay socket RXA005X. Processor-controlled function self-test of all relevant components (every 10 seconds) and PGSA technology with independent algorithmic sensitivity adjustment in the event of interference such as dust to maintain functional reliability. Large function and reset button with integrated white light cone in the event of a fire and during the test alarm. Acoustic signal (85 dB at 3 m) and red flashing LED for alarm. Acoustic signal for low battery, soiling or error message with acoustic signaling and yellow LED. Time-limited deactivation function of smoke detection to suppress false alarms from the detector for approx. 12 minutes with automatic reset function to normal operation. Quiet function to delay error messages to the day. Error messages can be suppressed for a further 8 hours by acknowledging the reset button. The fault of a dirty detection unit/detector head cannot be reset as long as the error message is still being analyzed in the evaluation unit. Dismantling and theft protection can be activated, then unlocking is only possible with a screwdriver with a maximum size of 7mm. The detector is automatically activated when it is screwed into the base. Battery life of at least 10 years using an encapsulated lithium battery.