KNX switching actuator 10-fold or blind/shutter actuator 5-fold TXA610D

KNX switching actuator 10-fold or blind/shutter actuator 5-fold TXA610D – Hager – 3250616048805: Switching/shutter output KNX10/5f,16A C-Load TXA610D bus system KNX, other bus systems without, mounting type REG, width in modular units 6, local/manual operation, with LED display, number of binary inputs 0, max. switching capacity 14375W, output power 2300W, suitable for C-load, max. number of switching outputs 10, max. 5-way KNX easy, 16A, C load. Switching/blind actuator REG for switching an independent load per actuator channel or controlling a blind drive via two actuator channels each, any combination of drive and switching functions. Modular installation device with integrated bus coupler, QuickConnect plug-in terminals for KNX bus connection, load/switch connections and labeling field. Operating button for manual operation for each output with status LED (single-surface operation), slide switch auto/manual and illuminated programming button. Functions: Control options for the switching channels for ON/OFF, timer function with switch-off early warning and forced control with the respective status display. Automatic function can be deactivated/activated and load shedding through channel deactivation with the highest priority possible. 64 scene functions can be set per channel. Roller shutter/blind function in up/down mode with slat angle adjustment, positioning function and slat adjustment for blinds in percent parameterization. Status objects for the position of the slats in percent and the upper/lower end position. Forced control with status display and 3 alarm objects with different priority control. 64 scene functions per channel and adjustable sun protection function. Note: The device can be programmed using the easy commissioning tool, easy configuration server or the ETS (from version 4). Observe the instructions of the roller shutter/blind motor manufacturer.