Vertical roof fan, 230V 1-PH - Roof mounted ventilator 5830m³/h 875W VDW 400/4

Helios - VDW 400/4 - Vertical roof fan, 230V 1-PH - Roof mounted ventilator 5830m³/h 875W VDW 400/4
Photo source: fig. possibly similar
Photo source: fig. possibly similar
VDW 400/4 07338 4010184073383 EAN/GTIN DE 31687255 WEEE

£1,626.19 incl. VAT (£0.00)
£2,626.59 (-38.09% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Vertical roof fan, 230V 1-PH VDW 400/4 mains frequency 50Hz, rated voltage 230V, housing material... more
Vertical roof fan, 230V 1-PH - Roof mounted ventilator 5830m³/h 875W VDW 400/4 – Helios – 07338 – 4010184073383: Vertical roof fan, 230V 1-PH VDW 400/4 mains frequency 50Hz, rated voltage 230V, housing material aluminium, volume flow 5830m³/h, nominal power 875W, air flow temperature -20 ... 60°C, protection class (IP) IP54, nominal width 400mm, corrosion protection other, Vertical discharge roof fan with efficiency-optimized aluminum housing and newly developed high-performance centrifugal impeller. Housing made of seawater-resistant aluminum with integrated anti-tamper protection. Motor support plate and base plate with inlet nozzle made of galvanized steel. Base plate with threaded screws for attaching suction-side accessories (hole pattern according to DIN 24155, sheet 3). Protective grille as standard on the outlet side according to DIN EN ISO 13857. High-performance radial impeller with backward-curved plastic blades. Dynamically balanced according to DIN ISO 1940-1. Speed controllable single-phase AC external rotor motor in closed design in IP 54. Ball bearings with moisture protection insulation. Maintenance and radio interference free. With external isolating switch as standard, protection class IP 65.
... more
Power frequency 50 Hz
Rated voltage 230V
Material of the housing Aluminum
Surface protection Housing other
Automatic flap integrated no
volume flow 5830 m³/h
Rated capacity 875 W
Medium temperature -20..60 °C
IP protection) IP54
Nominal duct diameter 400 mm
Exhaust direction vertical

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Vertical roof fan, 230V 1-PH - Roof mounted ventilator 5830m³/h 875W VDW 400/4"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.